Zebco Fishing - Popular Questions, Answers, Tips & Manuals

Zebco 202 has a foot projecting from the frame.....this is mated to the reel seat area on your rod and the knurled rings on the rod are tightened down over it to secure it for fishing.

Mike Reel Repair Fishing Reel Parts Service http://www.davesreelservice.com/

from what i can tell, yes and no. if you're using larger line then you can use a non-offset eye. but for smaller line the eye of offset as per the manual instructions which are still pretty vague

Mat Reel Repair And Parts Order Reel Parts http://www.davesreelservice.com/ Mike Reel Repair Fishing Reel Parts Service

You might not have enough line on it to cast cleanly.

Here's a link on your ZEBCO. Thread Zebco 808 drags how do they work corrections

a good quality marine gear and fish gear shop will be most likely place to get help

I have a Zebco 33 reel. No one on this site can tell me how to get the front cover off. The only way i know to get it off, is by putting it in my 20 ton press and crushing it. Who ever designed this reel should be shot. If the reel jams on the boat, just throw it in the water. It is not user friendly.

Your reel has pickup pins on the spool that will guide the line onto the spool when you reel in. Try holding gentle tension on the slack line just above your reel and start reeling in. If this does not work then remove the top cover of the reel and look to see if the line is tangled up on the inside around the center shaft underneath the pickup pin cover. if this is the case, simply unscrew the pickup pin cover from the center shaft. It will be on the tight. Remove the tangled line and reassemble.

Try it and see. It's hard to see ANY line while it's in the water.

That would depend on the rod, but usually either the front part of the hand grip can be unscrewed, or there is a screw under the rod that will loosen it.

I am assuming you know at least something about fishing with a baitcast reel. If you do not, make sure you release the thumb button when you cast. Chances are your line is either tangled or dirty on the inside. Also, the longer the line sits on the spool, the "curlier" it becomes, making it more difficult to get a good cast. I would suggest replacing your line. If that doesn't help, then its possible that the release pin isn't releasing when the button is released. If this is the case, it is probably time for a new reel. Zebco 33's are inexpensive, and not really worth the trouble to try and repair- better to just invest in a new one.

Hold the line with your index finger and against the rod itself. Then cast and release your hold

you have to release the button after you start your cast, distance,height and length of cast is determined by where you release the button inside the forward arc of your cast, just like throwing a baseball.

remove cover and untangle line

It twist to get it open -

remove cover and spool, if rubber pressure disk is damaged and spool has warped it is not worth repairing, if not re assemble and replace line

get the best deal in zebco spincasting handle when you shop with the best online selection on eBay.com

its an ok reel also comes in left hand version

Question edited for clarity, make and model in correct order. You are correct, these is nothing available. https://www.google.com/search?q=Pinnacle+Solene+SLP10+bait+cast+reel+parts Mike's Reel Repair is the place for all reel repair and parts.

Mikes Reel Repair - Fishing Reel Parts & Service

Mikes Reel Repair https://www.mikesreelrepair.com Fishing reel parts and service and upgrades. We repair rods, reels, trolling motors, depth sounders, downriggers and Coleman Outdoor products.

Reel Parts

Shimano Parts - Abu Garcia Parts - Daiwa Parts - Zebco Parts - ...

Abu Garcia Parts

This section now contains Abu Garcia as well as New Mitchell ...

Reel Tuning & Upgrades

Our Ceramic Hybrid Bearings are spec'd specially for us at the ...

Schematics

2023 Mikes Reel Repair Ltd, All rights reserved. ' Custom ... More results from mikesreelrepair.com »