Not switching on have replaced
Hello, take some switch cleaner--Radio Shack- and
spray just a small amount into the switch. Did you installed the battery
correctly with the polarity be correct. Does the battery compartment have any
type of corrosion?
If this does help then there is something else wron with it. stewbison
on Aug 15, 2011
The right eye is blurey and dirty
Hello, clean the outside of the lens with a good optical cleaner. If you have,
then trying adjusting the focus for each eye. Try both ends of this binocular at
one eye at time; such as, left first, then the right eye until there are
focused. That is if you can focus the optical end and they leave you with the
eye lens for focus. Let me know how it works out. stewbsion
Yukon NVB Viking...
on Aug 15, 2011
Ir tourch has brocken off
That's OK. When IR broke off did it leave any hole into the cavity of the
scope? If it did, use some black anodized aluminum (or black plastic) plate
1/16 or smaller and mold it and fit to where it broke off only if there are
Once the plate been fitted tightly. Now you drill some holes. The number of
drill holes is up to you. Go down to your local fastener business, the carry all
kinds of screws, machine screw, bolts, nuts, everything that you might need. Get
the machine screws that are the self threading. They will look like a little
machine screw with SAE threads but it will be tapered on end with a small notch
cut in the end. This way you will not have to use a tap to thread the
holes.-----One more thing here, pre-tap the drill with self tapping machine
screws. This way you can clean out the scope cavity Then apply a thing layer of
black rubber cement to the cover plate and then screw the machine screws. The
length of the machine screw are critical. You don't want the to long where the
reach far into the scope cavity. It could disrupted the flow of light to the NV
Now, for a IR lumination. Get head light with one high luminating bulb. Get
an IR lens and have it fitted to the head light, now you have IR lumination.
Simple, hey. stewbison
on Aug 13, 2011
The Main IR Light. (the one used for long
Here we go. Take it to electronic repair facilities. See if the can replace the LED IR. Now if they want. Call Yukon NV Optics and see what the charge, normally these companies have flate fee they will charge. They really don't make it easy for the owner to repair these NV binocular. Basically, the binocular will almost be totally taken a part. stewbison
on Aug 11, 2011
I want to buy ukon
The Yukon Futurus series best in optics and body
construction design to create a high quality, professional binocular.Yukon's patent protected Rubber Armored™ body, which mixes ergonomic design with rugged good looks.Yukon's Limited Lifetime Warranty.
For more visit the link provided below :
on Jun 22, 2011
Extended viewing distance when fitting a external
well its a gen "1" unit so any extra "ir" light will help out a lot! i use a deban gun light 50 watt buld with an "ir" filtter fitted to the light i can see nearly 1/2 mile and i can just about target a rabbit at no more than 100m with my sight set at x5,,,(3-9x50 with a 30mm bore) there not all there cracked up to be,,you loos a lot of light going through the scope,
to have a good night sight you need to go to gen 3!!!! so you need to sell your sole to buy one!!!
Yukon NVMT 2x24...
on Jul 15, 2010
What is linear counter balance,What is the
The linear is the bearing they use for smooth motion up and down the guide poles, If you use an assisted chin dip unit its a similar concept it take some of the weight off the bar.In my opinion the Smith Machine promotes poor lifting form and puts the lifter in more danger than the traditional power cage.
on Apr 10, 2010
YUKON NVMT 3 ( 4X 50 )
'it does not have objective lens'?! Yes, it could be the reason why you cannot see anything. Your NVMT should have a lens in both ends. It's just a regular telescope with some extra features.
on Oct 24, 2009
Not finding what you are looking for?