Yukon Optics - Recent Questions, Troubleshooting & Support


As long as you use a special lens cleaning cloth it will not hurt the lens, it is the same cloth that is used to clean eye glasses or any camera lens. You can buy these almost anywhere.

Yukon 100X... | Answered on Nov 05, 2018


fixya site doesn't do phone calls
any way if you got it in 2/14/2014 why did you not do somethinh about the problem immediately and not 4 years later

Yukon FF13011... | Answered on Mar 05, 2018


Why . interested in making an expensive paper weight

Yukon NVRS... | Answered on Sep 25, 2015


Define 'clear'.
Is it blurry? Focus the scope or clean the lenses.
Is it distorted? Don't know how to fix. Especially if the lens is cracked/scratched etc.
Is it dark/snowy? Put fresh batteries in.
Do you see black spots in the tube? Don't worry, certain amount of these are quite acceptable.
Anyway: It's a night vision for pete's sake. The picture won't ever be like the one on normal binoculars.

Yukon 24021... | Answered on Mar 07, 2012


Try to jank it left-right and simultaneously try to force it back to threads (either pulling or pushing). Don't hit it with anything since this may damage the insides.

Yukon NVMT... | Answered on Mar 07, 2012


Hello, let do this. IR illuminator has a montary switch, that is when you push it comes on, and when you release it the IR goes off and it has a red LED to indicate the IR illuminator is being activated.

When you turn you binocular on there will be a green LED activated. This switch is DTSA---double throw sing activated. That is, one throw of the switch it turns on the binocular, the throw will turn off the binocular.

Also within the control panel there is timing circuit to keep the IR illumniator on for ten second the shuts off. Make sure you have the right switches etc. Let me know, then we can brain storm on this matter. stewbison

Yukon 28041... | Answered on Mar 07, 2012


Here:
http://main.yukonopticsglobal.com/ranger-5x42-digital-night-vision.html

Yukon 28041... | Answered on Jan 15, 2012


Take it apart by peeling away rubber cover and then remove two mounting screws. Carefully split cases and see where parts are arranged just in case they shift. Laser and lens frequently get jarred loose ESP in a golf cart environment. Place laser and lens if loose back in mounts and gluon in place with superglue or equivalent. Make sure to get no glue on lenses. Reassemble and it should be good to go again. Total time. Ten minutes maybe.

Yukon SightMark... | Answered on Oct 04, 2011

Not finding what you are looking for?
Yukon Logo

38 questions posted

Ask a Question

Usually answered in minutes!

Top Yukon Optics Experts

Marvin
Marvin

Level 3 Expert

84524 Answers

John Porter

Level 2 Expert

95 Answers

Bill Boyd

Level 3 Expert

53745 Answers

Are you a Yukon Optic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...