Yes Televison & Video - Page 8 - Popular Questions, Answers, Tips & Manuals

My normal response is no you can't. This is because mobile phones don't have an infra red transmitter. However there is one phone that does. Also if the television is a smart television, it can be controlled via the wifi connection.

How to Install Bruhm TV Remote App on Android to Control TV

smarttvremoteapp.com https://smarttvremoteapp.com > bruhm-tv-remote-app Mar 29, 2023 - All TV Smart Remote Control can be downloaded from Google Play Store on Android devices. You can easily control your Bruhm TV using this app.

'make model (what it is)' in all questions? " batn red "?? Google make model troubleshooting ..

Television is set to the wrong Source. Or the dog pulled the HDMI cable out. 'make model (what it is)' in all questions please, first 3 words. In your case also for the television so 7 words with 'and' between. You can try a power reset. Unplug from the mains wall socket for 15 minutes and plug back in. If it is IPTV, reboot the Router. https://www.google.com/search?q=decoder+showing+green+light+but+not+responding ..

Question edited for a lot more clarity and toss in some CAPS. Page 27 of the menu refers to the Parental Controls Code https://www.manualslib.com/manual/559309/Westinghouse-Vr-4625.html?page=27&term=Parental+Control&selected=1#manual The ATSC Code mentioned here Q: Why do I need to enter a tuner code for my television to receive over-the-air broadcasts? A: The access code input enables Westinghouse to accurately count the end-users who seek to enable the ATSC tuner, for purposes of royalty reporting (but for the end-user, this activation is free). This looks to the future of television design: Digital televisions are beginning to include installable hardware or software features. https://www.google.com/search?q=Westinghouse+vr-4625+ATSC ..

The 3 digit code is based on the television that the remote is going to control, and you don't tell us that! All explained here https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote ..

It would help to know what is on the Sidebar, but according to this, they can be removed in Settings. https://www.google.com/search?q=ecco+tv+screen+show+side+sidebar ..

If the conlog meter is showing rf-Con, it means power supply doesn't reach the meter at all its either Loss of phase from the transformer or a loose contact from the connection on your pole Check around to confirm if any other person is experiencing the same. Again,, faulty wiring or a malfunctioning control board may be the problem. You need to call Conlog customer support to sort this out. +27 31 274 1100

Question edited and translated into written English.Put new batteries in the RemoteorPress the On Button on the set.Here is the Service Manual, the IR Sensor board, the main board and anything else you may need until SmartAviator solves the question.https://www.google.com/search?q=Tcl+24v10f..

There are no codes for original remote. If you are using Universal Remote Control, try these codes Remote Control Codes For Pensonic TVs - Codes For Universal Remotes

Hello, this happens when the HDMI connection on either device has failed or the HDMI cable is bad. Can you still access the television menu with a button on the television or from its own remote? When this does not help and unplugging the television, for some time did not, then take a clear flashlight and shine its light everywhere on the screen. When the backlight is broken, you can still see what is on screen in that small lit spot. This is a common failure and can often be repaired. There are video's about it on YouTube. Capacitors for the power supply hold high voltage so unplug the set from the mains and wait a little before even opening. Still never touch those small towers. When their top, that looks like divided in three parts, isn't flat anymore then there is a power issue and those capacitors must then be replaced.

You posted to Television and Video category? All questions need full 'make model (what it is)' first 3 words. Or this happens https://www.google.com/search?q=model+9876 ..

The screen may become dark if Picture mode is set to Cinema or Custom. If the screen continues to remain dark after changing the picture quality mode, go to the Backlight, Picture, Brightness menu and adjust the brightness to your liking. When Power Saving is fixed to Low or High, the screen becomes dark. Some TVs have a Light Sensor so the picture will just become brighter or darker depending on the lighting in the room. You can also try programming from a different source, like a DVD player or VCR to check whether the problem is caused by the device that sends the signal to the TV.

No, it a non proprietary device for a Universal Remote. It looks like you can buy the remote for it though in the Philippines. We are in North America so the search results should be better for you. https://www.google.com/search?q=megapro+plus+100+videoke+machine+remote+replacement ..

There is no way to enhance what is already on the set. You could use headphone via the audio output jack, or use powered speakers. The newer ones have HDMI, so theoretically you could connect a theatre style sound bar. https://www.google.com/search?q=hiteker+13%22+prison+tv+increase+volume ..

There are two types of lock. A consumer set passcode or pattern. or A PUK Lock aka a SIM LOCK. Which do you have? For the first one is easy, you just do a Hard Reset, scrub it clean and start again. ..

Make and model of Stereo may help you get an answer.

Question edited for clarity. https://www.google.com/search?q=Ecco+LH32+dim+display ..