Yes Answered Questions & Fixed Issues

Do you work here? Claim your company

  • 10 Products
  • 55 Answers
  • 2K Views

You aren't going to like this answer - a HDTV does not need a special antenna to receive transmissions. It should work regardless of what TV/antenna combo you have.

Yes Televison &... | Answered on Sep 09, 2018 | 45 views


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.
Search the site by type in the "brand name" to your device; [Exclude the model number], in the "Search box at the top right of the display window of the Homepage" to get gathered related posts./

Yes Televison &... | Answered on Aug 03, 2018 | 34 views


You will need a service centre to re-instal the settings from a pre programmed EEPROM.

Yes Televison &... | Answered on Jul 31, 2018 | 87 views


Without a remote control, you can't. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
https://homenol.blogspot.com/
https://electrohelponline.blogspot.com/
https://remotesearch.blogspot.com/

Yes Televison &... | Answered on Apr 14, 2018 | 61 views


A cable converter box will not work that's why when high def cable came into effect people traded their boxes into the cable company but you can go to Walmart and look at the antenna screw into the cable they run anywhere from $25 to a hundred my ex-wife got one at dirt cheap is $75 1 for 25 bucks gave her six channels

Yes Televison &... | Answered on Oct 26, 2017 | 25 views


Please explain what you are talking about; Make, model and component number.

Yes Televison &... | Answered on Aug 14, 2017 | 30 views


Google their service centre

Yes Video... | Answered on Jun 12, 2017 | 45 views


no you dont bud
Have a flying time!

Yes Televison &... | Answered on May 07, 2017 | 29 views


Hi Helene, I'm IIZackII
There is no apt way to tell you how to hook it up.
If you can take a picture of the rear of your computer where the ports are located and a picture of the speaker's jack port, I'll reply to you as soon as possible.
Follow me on YouTube!
IIGame FreaxII

Yes Audio... | Answered on Apr 09, 2017 | 21 views


you may find songs with this by searching lyrics databases.
like
http://www.lyrics.com/lyrics/yes%20its%20been%20awhile

Yes Audio... | Answered on Mar 30, 2019 | 164 views


Do not post a new question, use the email link to answer. The player has failed, best route just replace it.

Yes Televison &... | Answered on Aug 19, 2016 | 27 views


Clean the disk drive if possible.

I've had many a problem with DVD players saying "No Disc". It can be any number of things. On my portable DVD player, some of the problems were traced to one of the following:
  • The DVD is not properly set in the cradle,
  • The battery power left in the rechargeable batteries was not strong enough and needed to be replaced,
  • The Lens needed to be cleaned on the player.
I've had two DVD players stop working in this way, but never figured out why because the repair cost was much more than to just buy a new player.

There is a similar problem at this site:


Will not play dvd says reading disk then no disk

Yes Televison &... | Answered on Apr 13, 2015 | 50 views


I can't agree more. Get rid of it and buy something decent.

Yes Audio... | Answered on Nov 26, 2014 | 81 views


Let me research for you

Yes YMP980 MP3... | Answered on Mar 18, 2011 | 34 views

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Yes Experts

Marvin
Marvin

Level 3 Expert

84565 Answers

NOEL
NOEL

Level 3 Expert

8429 Answers

janman

Level 3 Expert

369 Answers

Are you a Yes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...