Yardman Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 16 Products
  • 22 Answers
  • 3K Views

Before you start doing anything around the deck area, remove the spark plug.
Depending on the model, it could be riveted or welded on. If you can't locate any bolts or screws it may not be able to be removed.

Yardman Yard Man... | Answered on Jul 09, 2016


If it is the following connector it is a press in fit. Carefully remove the old brass fitting from the carburetor. Note: these are not swivel connectors as most users think. Position it at the angle needed before pressing the new connector.


25705657-odsvckng3qrcznr3fbnrufww-4-0.jpg

Yardman Yard-Man... | Answered on May 21, 2015


Do not start to do this but put the blower in gear like you would run to drive its self and try to turn the wheels by hand and if they turn easily then you may have a shear pin that is broken or missing in the drive pulley.
Just a thought.

Yardman Yard-Man... | Answered on Jan 31, 2015


recoil spring might be broken

Yardman Yard-Man... | Answered on Nov 02, 2014


switches on the seat, blade engagement lever and clutch/brake pedal

Yardman Yard Man... | Answered on Sep 27, 2014


If this is a zero turn as pictured then there is nothing wrong with you wheels unless they are not moving at all. They will correct as they hit ground and spin freely on uneven ground when not in contact. If it is stuck in one position then you may have a bad bearing and need a new wheel post.

Yardman Yard Man... | Answered on Aug 23, 2014


how do y ajust m'y clutch It slipery on hill

Yardman Garden | Answered on Aug 23, 2014


I suggest that you should remove deck, turn upside down and place straight edge or tight string line over blades from outer edges of deck frame. Use the guide strips to get even measurement. Rotate blades and measure distance from straight edge to tips at both sides. they should be the same. If there is difference from one side to the other, either the blades are bent, or if each blade is same at each end but not aligned in centre (difference in height) then the spindles need packing to make them even. Check that bearings are not loose. If you do not understand this best to take it to service centre.

Yardman Yard-Man... | Answered on Jul 24, 2014


If it is a cable PTO which operates from a handle there are two types I've worked on. one has not adjustment, the other has a spring which can be moved to compensate for streching of the mowing deck belt. If your mower has no adjustment than more tham likely it is the belt.

Yardman Yard Man... | Answered on Nov 11, 2013

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Yardman Experts

Daryl Gleaton

Level 3 Expert

749 Answers

Dan Apthorp

Level 3 Expert

2815 Answers

Jan Drake

Level 1 Expert

3 Answers

Are you a Yardman Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...