THREAD COLLECTS UNDER MY YAMATA FY 760
try changing the needlerethread the machine top & bobbinclean under the needle plate & in the bobbin area for loose threads or lintcheck to make sure the bobbin & bobbin case is not damaged
Yamata aFY811
Please let us know your concern so we can help you.
1/16/2021 2:38:13 PM •
Yamata FY811...
•
Answered
on Jan 16, 2021
•
55 views
I have a new Yamata FY920 and the needle will not go when pressing the presser foot
Q: So your brand new Yamata FY920 needle will not go when the Power Foot-Peddle is pressed.
A: If it is new, there is little chance any part is worn out.
The most likely cause is that the Power Train has been disengaged as if to wind a Bobbin. The Handwheel, on the Left side (the top wheel), has a slide-switch in the middle of the hub. Slide that switch in the other direction and your Power Train should now be engaged again, allowing the Needle to go Up and Down when the Power Foot-Peddle is pressed. That should do the trick to get the Needle to sew again. [ P.S. That's a nice machine, but be careful when you clean it, since the markings have been known to run if any kind of solvent, or even some plastics, come in contact with them. ] Hope this helps. Sincerely, Amender, 2020-DEC-04.
#
Not finding what you are looking for?