I have had 3 radios installed at different
You need a static blocker/inhibitor get it one at any stereo installation center or radio shack and wire it in the hot or ground. There are different types the sales person can help with the type for your vehicle.
Gunny :-)
2/4/2018 6:48:03 PM •
XM Radio...
•
60 views • 0 helpful votes
Loss of XM signal
The problem is amazingly simple.
The red wire goes to your ignition so it turns the radio off when you power down your car so as not to discharge the battery.
The YELLOW wire is usually your memory and it connects to the power side of your fuse box (anywhere will do as long as it's powered when the car is off completely). Occasionally this wire is blue but it's rare.
This wire draws a tiny little bit of power so your stereo doesn't 'forget' your station settings etc.
BTW Pioneer is one of my favourites :)
4/16/2017 4:42:03 AM •
XM Radio...
•
1,305 views • 0 helpful votes
Radio code
You can buy from several places on the net, but sometimes the default is 5555
I am changing my Blaupunkt car cassette
you can find which ones are the speaker wires by using a small AAA baterry with the car battery disconnected try touching to the wires 2 each side of the battery when you get the right ones the speaker will make a sound
Peugeot 206cc
Double check your settings,... Or u may need an antenna filter for your fm radio to work... its less that 20.00
No sound
did you check wires from the xm antenna to the receiver???//
1/22/2014 10:27:45 PM •
XM Radio...
•
106 views • 0 helpful votes
Pioneer instructions
when tuned to desired station press and hold the selected button eg 1,2,3,or 4 for about 2 sec you will hear a beep sound and it should be saved
Renault radio
go on the net go all the w's .radio codes and search from there
Not finding what you are looking for?