Xerox Popular Questions, Answers, Tips & Manuals

Question edited for clarity and typo.

Fault Code 060-310: Warm Up Failure - Support - Xerox

Xerox https://www.support.xerox.com > en-ie > article Fault Code 060-310: Warm Up Failure. Article Id: 1715946 ' Published: 11/09/2016. Product support for. Phaser™ 7100 ...

Error Codes > Xerox > Phaser 7100 > Code 060-310, 061-340 ...

PrintCopy .info https://printcopy.info > code=060-310, 061-340, 061-... Xerox Phaser 7100 · Code: 060-310, 061-340, 061-346 · Description: ROS Failure Laser error has occurred due to one of the following problems. The SOS is unstable ...

• Error Codes > Xerox > Phaser 7100 > page 1 - Printcopy.info

  https://printcopy.info > model=Phaser+7100 A differential circuit output error was detected between the detection output and the compensation output of the Fuser Unit NC Sensor.

If turning the machine on and off and on again does not clear the problem, your best bet is to contact Xerox support for the machine. That is what Xerox advises. I could suggest going to the printer driver for it on the server and seeing if you can reset that BUT that could waste your time and demand expertiese not at hand. I'd rather not lead you down the primrose path.

1. estart the printer: Turn off the printer, wait a few seconds, and then turn it back on.
2. Update the firmware: Check the Xerox website for any available firmware updates for your printer model. If an update is available, follow the instructions to download and install the update.
3. Perform a firmware reset: Contact Xerox support to perform a firmware reset, if needed.

Error 386: This error message typically indicates a problem with the printer's communication interface. To resolve this error, try the following steps:

1. Restart the printer: Turn off the printer, wait a few seconds, and then turn it back on.
2. Check the cable connections: Make sure that the cable connecting the printer to the computer is securely connected at both ends.
3. Try a different cable: If the cable connections are fine, try using a different cable to connect the printer to the computer.
4. Check the computer settings: Make sure that the computer is set up to communicate with the printer correctly.

If the error persists after trying these steps, I would recommend contacting Xerox support

1. Check the user manual for the Xerox Wide Format 8830. This should provide instructions on how to troubleshoot and solve any issues you may be having with the machine. 2. Contact Xerox customer service for assistance. They should be able to provide you with more detailed instructions on how to solve the issue. 3. If the issue is related to a hardware or software issue, you may need to contact a qualified technician to come and repair the machine.

Most Xerox machine are under a supplies agreement and the machine recognizes that a non coded toner refill has been used. If I remember from previous questions here, it needs to be reset by Xerox. Try cleaning the contacts and reseating the cartridge. https://www.google.com/search?q=Xerox+WC7435+-+Toner+Error ..

The error code 303.777.00 on the Xerox WorkCentre 7845 suggests a problem with the power supply. Since the machine is restarting on its own every 20 minutes, it is likely that the power supply is failing. You should contact Xerox customer support for assistance, and a trained technician should diagnose and repair the power supply to fix the problem.

You have to replace the chips

How do i do Chip Bypass Xerox WC5325? - Fixya

https://www.fixya.com > Forum > Televison & Video 3 hours ago - To bypass the V-chip: You can view the locked shows by pressing the number 9 and QV buttons on the remote at the same time, whenever your ...

Drum CRUM Chip (Reset 013R00591, 13R591) Xerox® WC ...

https://www.partsdrop.com > index.php > copy-drum-ct... Drum CRUM Chip (Reset 013R00591, 13R591) Xerox® WC-5325 style. $14.00. Buy 10 for $12.50 each and save 11%; Buy 40 for $10.50 each and save 25% ... COP 14.00

• Toner Connector CRUM **DMO (Resets 006R01160 ...

  https://www.partsdrop.com > index.php > toner-connect... Toner Connector CRUM **DMO (Resets 006R01160, 6R1160) Xerox® WC-5325 style. $14.00. Buy 10 for $12.50 each and save ... COP 14.00

4pcs Wc5325 Toner Chip For Xerox Workcentre5325 ...

https://www.aliexpress.com > ... > Cartridge Chip Shop toner chip with fast delivery and free shipping. The cartridge has good chip performance and stability, which makes it can restore the chips of the old ... Chip Type: Toner Chip Quantity: 4pcs/lot Use in: For Xerox WorkCentre 5325 5330 5335 Regions: South America, Middle East,Eastern ... US$11.90 ..

Hai this is Arun. If your motherboard gets power but the computer not starting then there are two solutions :

1. Unplug the wire that is coming from the power switch to the motherboard & plug it again.
2. If it is still not starting, then remove your CMOS battery and insert it again in the motherboard.

Hope these steps may solve your problem. Thanks.

On the Xerox XC1250 copier, the status code H3 indicates a high-temperature error in the fuser section. This error occurs when the fuser unit gets too hot, and the copier automatically shuts down to prevent damage. To resolve the issue, try the following steps:

1. Turn off the copier and unplug it from the power source.
2. Wait for about 20 minutes to allow the fuser unit to cool down.
3. Check the fuser unit for any signs of damage, such as cracks or burns. Replace the fuser unit if necessary.
4. Check the power supply and make sure it is delivering the correct voltage to the copier.
5. Plug the copier back in and turn it on.

If the error code persists after trying the above steps, it may be best to contact a Xerox service technician for further assistance. They will have the necessary tools and expertise to diagnose and fix the issue.

The cartridge may not be compatible. I think the Xerox brand part number for the black toner is 106R01480.

Please check the link. Thanks https://www.youtube.com/watch?v=lUkdxnyp8CM

not a car, moved you post in English please.

Question edited for clarity. Please don't type in all CAPS, it is considered SHOUTING which is rude and it makes it harder to read. Lower case additions are mine! You need a service call

Error code 045 315 - Customer Support Forum

https://forum.support.xerox.com > Hardware > Error-co... Nov 29, 2021 · 2 posts Please take a look at this article about the Fault Code 045-315 in the online support for your machine. Please consider contacting your support ...

• Fault Code 045-315: Video Line M Fault - Support - Xerox

  https://www.support.xerox.com > en-us > article Sept 21, 2015 - Fault Code 045-315: Video Line M Fault · Try these solutions · Did this help?

Error Code 045-315 - Copytechnet

https://www.copytechnet.com > ... > Xerox Oct 18, 2019 - Check, replace Y M Ros unit. Or replace bad MCU pwb. Xerox 700 error code 045-315 Sept 8, 2019 xerox 700 error code 045-316 May 31, 2019 Error Code Xerox 700 Fault Code 045-360 Sept 25, 2017 Xerox 700 Help please May 20, 2017 More results from www.copytechnet.com

Xerox 700 color press error 045-315 - Color Printing Forum

https://www.colorprintingforum.com > threads > xerox-... Aug 17, 2013 - I believe that error is referenced as being a YM (yellow/magenta) ROS assembly fault. This is the black box laser mirror assembly. xfactor ...

It is the Supplies Activation code. It can only come from Xerox themselves. It ties you to buying supplies from them. If you put in a refilled toner it locks the machine.

Activation Code required - Customer Support Forum

https://forum.support.xerox.com > td-p Aug 18, 2020 · 4 posts Hi, we have a Xerox Workcentre 7530. Since today morning the printer shows suddenly we should enter an activation key.

• Enter the Supplies Plan Activation Code - Support - Xerox

  https://www.support.xerox.com > en-us > article Touch Device Settings>Supplies. Select Enter Supplies Plan Activation Code. Enter the new code. Touch OK. Enter the Supplies Plan Activation ... ..

The P error code on a Xerox XC 1040 copier typically indicates a paper jam or paper feed issue. Here are a few steps you can try to troubleshoot the issue:

1. Check for any visible paper jams in the paper tray, the paper path, and the exit area.
2. Remove any jammed paper and clear any debris from the paper tray and paper path.
3. Make sure the paper tray is loaded correctly and that the paper is not wrinkled or bent.
4. Check the paper guides and make sure they are adjusted correctly for the size of paper you are using.
5. Check the paper sensors and make sure they are clean and not obstructed.
6. Check the paper feed rollers and make sure they are clean and not worn out.
7. Try to copy again and see if the issue is resolved.

It's important to note that the P error code could be caused by other issues such as a malfunctioning paper feed assembly or a software issue, if the problem persists after trying these steps, it is advisable to call a technician for further assistance. Have the machine's manual close by and have the model number and the serial number of the machine when you contact the manufacturer or a technician for further assistance.

If your Xerox 8080 printer is giving a flash on the LCD screen when you try to power it on and then immediately shutting off, there could be a few different issues causing the problem. Here are a few things you can try to troubleshoot the issue:

1. Check the power supply: Make sure the power supply is properly connected and functioning. If the power supply is damaged or not functioning properly, it can cause the printer to give a flash on the LCD screen and then shut off.
2. Check the printer's connections: Make sure all of the printer's connections are secure and properly aligned. If the connections are loose or damaged, it can cause the printer to give a flash on the LCD screen and then shut off.
3. Check for any other visible issues: Inspect the printer and its components for any visible issues that may be causing the problem. This can include debris or foreign objects that may have gotten stuck in the printer, or damage to the printer or its components.

If you have tried these troubleshooting steps and the problem persists, it may be necessary to have the printer serviced by a professional. A technician will be able to diagnose the problem and determine the necessary repairs.

It sounds like your Xerox 5855 printer is experiencing a technical issue that is causing black stripes to appear on the printed pages and an error message to be displayed. There are a few things you can try to fix the problem:

1. Check to make sure that the printer is properly connected to the computer and that all cables are securely in place.
2. Check to make sure that the printer is fully operational and that all the necessary components, such as toner and ink, are installed and functioning properly.
3. Check to make sure that the printer driver and software are up to date. You may need to download and install the latest version of the driver and software from the Xerox website.
4. Clean the printer's printhead and roller. This can help to remove any dirt or debris that may be causing the black stripes to appear on the printed pages.
5. Check the printer settings to make sure that the correct paper size and type are selected.
6. If the issue persists, you may want to try resetting the printer to its factory settings. To do this, consult the printer's manual or contact Xerox customer support for further assistance.

If you have tried all of these steps and are still having issues with your Xerox 5855 printer showing black stripes on the printed pages and displaying an error message, you may need to have the printer serviced by a professional. You can contact Xerox customer support for further assistance and to find a service center near you.

You must use Genuine Xerox supplies from Xerox, especially if you are on a lease and supplies deal. You slip a refilled or 'compatible' replacement toner from 'The Toner Guys', the machine locks you out until reset by a Xerox tech. https://forum.support.xerox.com/t5/Hardware/Invalid-Toner-Cartridge-error-Workcentre-3615/td-p/199538 and although it is a different model, it is the same series Turns out the WorkCentre 3615 has two types of toners - None Metered 106TO2722 and Metered 106RO2724. Both toner boxes say WorkCentre 3615. You must order the correct one or you will get this error and the machine won't work at all. Who knew? Xerox admitted they sent us the wrong one, so they are offering to fix with a code over the phone. https://www.google.com/search?q=xerox+workcentre+3215+invalid+toner+cartridge //

It sounds like you are experiencing an issue with your Xerox 6605 printer. Here are a few things you can try to troubleshoot the problem: Check the printer settings to make sure that it is not set to make multiple copies by default. Make sure that the printer is connected to the correct computer and that the cables are securely plugged in. Check for any error messages on the printer's display screen and follow any troubleshooting steps suggested. Try printing a test page to see if the issue is with a specific document or file. If the issue persists, you may need to try resetting the printer to its default settings. If none of these steps resolve the issue, it may be helpful to consult the printer's manual or contact the manufacturer for further assistance.