Xerox Logo

Xerox Popular Questions, Answers, Tips & Manuals

Do you work here? Claim your company

  • 1K Products
  • 75K Answers
  • 2M Views

"Key"button = > enter Admin like ID + (1111 from the right side buttons ) like password = > i button down left = > Tools = > Troubleshoot = > Reset = > Software reset = > All Software = >
Reset ( may need 2 times push )

Xerox Office... | 268 views | 1 helpful votes


Check the flag on reg sensor (before drum)

Xerox Office... | 28 views | 1 helpful votes


Pull out xerographic module, then firmly push it back in, or replace

Xerox Office... | 25 views | 0 helpful votes


1-800-835-6100
Call: 1-800-835-6100. Xerox offers a robust set of self-service solutions through our online knowledge system, YouTube Video site and community forum discussion boards to assist in resolving problems Customers may encounter with their Xerox device, regardless of device warranty or contract.


http://www.office.xerox.com/support/phonesupport.html

Xerox Office... | 25 views | 0 helpful votes


Before using the altboot software to examine the sbc board, check ALL power strips and any other possible connections to be certain no fuse is being tripped, no overheat sensor is being triggered, no power strip is overloaded with too many things plugged into it, etc.
Very often power strips are simply overtasked and will pout and shut down temporarily.
Also, if possible plug your unit directly into a wall AC outlet, with NOTHING else plugged into the same outlet.

Xerox WorkCentre... | 20 views | 0 helpful votes


Maybe try this, it woks on Sagem that also produces xerox mfp...

Follow the keystrokes set out below, do not worry about what is on the display unless stated to check. All letters referred to are for the keys on the alpha key pad to the right of the control panel, under the plastic flap.

1st option: Press down arrow, *, #, ok, 1, ok, stop (red button),
Press down arrow, #, T.
The machine returns to the error code. Switch the machine off for 10 seconds, switch
back on. If successful the machine will warm up and come ready.
Press down arrow, *, #, 0 (ZERO), ok, stop.

2nd option
Press down arrow, *, #, ok, 1, ok, stop.
Press down arrow, #, look on the display, press up arrow until "T>>PRINTER" is
displayed. Press ok. The machine returns to the error code. Switch the machine off for 10
seconds, switch it back on. If successful the machine will warm up and come ready.
Press down arrow, *, #, ok, 0 (ZERO), ok, stop.
If this is a recurring problem the firmware on the board may need to be upgraded, or there
is a physical fault with the fuser unit. Low voltage / power surges in the supply power to
the machine may also play a part in the occurrence of the error.
The firmware needs to be version 1.10.

To check the firmware version do the following:
Press down arrow, *, #, ok, 1, ok, stop.
Press down arrow, *, W
Firmware version is displayed. Press stop to clear screen.
Press down arrow, *, #, ok, 0 (ZERO), ok, stop.
5401:
Press down arrow, *, #, ok, 1, ok, stop
Press *
The trace lists will be printed, firmware version is after PRT, as in example below.
In this example, the printer firmware is: PRT V 1.5
It is older than V 1.10 and the printer firmware need to be upgraded.njk

Xerox Office... | 21 views | 0 helpful votes


co online and you should find a website

Xerox Office... | 20 views | 0 helpful votes


Https://www.manualslib.com/manual/543536/Xerox-Docuprint-M205-B.html?page=53#manual

https://www.manualslib.com/manual/543536/Xerox-Docuprint-M205-B.html?page=357#manual

Xerox Office... | 29 views | 1 helpful votes


1) Verify if the problem appears on all the three colors of the ink cartridge.

2) Go to the Calibrate Color tab on the front panel of your Xerox printer.

3) Print a Color Reference page and adjust the color settings on the printer's control panel.

4) Check if the toner levels are low in the cartridge. If the toner level is less or empty, replace the toner cartridge with a one that is compatible with your Xerox Color 550 printer.

5) After installing the replacement cartridges, print a test page to confirm if the problem has been fixed.

Xerox Office... | 286 views | 0 helpful votes


I got this free Pdf manual from an online store for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the all the times I fixed the chipper in these 4 years

Xerox Office... | 44 views | 0 helpful votes


There is a problem with mcu. Try reconect mcu plugs
2_23_2019_4_57_23_am.jpg

Xerox Office... | 29 views | 0 helpful votes


CODE 03-548

Xerox Office... | 19 views | 0 helpful votes


Hi there's this website something like reliable-store and it is very amazing for manual for repairing servicing anything
someone on fixya recommended it to me and I thank him even today

Xerox Office... | 39 views | 0 helpful votes

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Xerox Experts

Peter Dragonetti

Level 3 Expert

798 Answers

Brad Brown

Level 3 Expert

18002 Answers

JMJr

Level 3 Expert

566 Answers

Are you a Xerox Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...