Xerox Office Equipment & Supplies - Page 8 - Recent Questions, Troubleshooting & Support
Reset admin password - Xerox WorkCentre 5335
Try:
- Press the Machine Status button, then Tools tab.
- Select the General feature, then Feature Installation.
- Enter the Feature Key on the Feature Key screen to reset the Administrator credentials to the default values ( admin and 1111).
How can solve xerox 4110 error code 093-311
This code means toner mot fail so check for toner caking after that go mvm location 762-032(write down current val just in case) whatever value ...A Hard reboot might be needed shut it down an turn up after 5 minutes
Xerox versalink c405 error 016-433
016-433 on c405
Just contact your Xerox supplier Manager person who you brought the kit off and ask for an 'activation code' and enter it under the 'detail' tab in 'Supplies' > 'Supplies Plan'
How to solve error code 093-317 of fuji xerox versant 180, any one knows the nvn chain link number, thanks
https://www.justanswer.com/printers/6dy3y-xerox-700-fault-code-093-317-replace.html
Quoting from link above on internet:
Answered in 28 minutes by:
3/14/2012
Technician:
Colin Vincent
As you probably have an idea it is black toner related as in there is insufficient black toner going onto the drum and the density sensor throws a toner dispenser error as a result. It's not a low toner issue as you said they are new so it has to be a dispenser issue. The toner is taken from the dispenser to the drum via an auger drive which is driven by a motor. Either it is not turning through a fault or more likely it is clogged up with old hardened toner making it bind or preventing insufficient new toner flowing through. (often happens if toner has got damp in storage at some point and it hardens in lumps when it dries)
.
Because the toner is extremely nasty stuff to breath and servicing the dispenser is messy and requires a toner vac to remove the old toner safely (it has special filters), i strongly recommend you get someone to take a look at the dispenser for you.
Even a technician may not want to repair a fault in the dispenser itself if it is confirmed for the reasons above. They may want to replace the dispenser as a unit.
Error Codes 9-343
That means , second BTR is not in contact with transfer belt. Open front door and pull out paper transport and check that is everything OK with black roll and her assembly.Check sensors for dirt,and gears for damage.If You have used one ,replace it.
Error code 9 - 358
Hi,that means ,cleaning auger is stopped.Probably toner waste container is full.Try to remove and replace waste toner container(or vacuum toner from container).
BR
Not finding what you are looking for?