Xact Communication Lands Phones - Popular Questions, Answers, Tips & Manuals
Manual xg2801
EL SEGUNDO AURICULAR NO ME DA TONO DE LINEA ME MANDA UN MENSAJE EN PANTALLA DE "BORRAR" COMO ACTIVO EL SEGUNDO TELEFONO ....URGE
1/22/2014 8:06:38 PM •
Xact...
•
204 views • 0 helpful votes
I have idectx1i twins cordless
make sure you are using the line cord that came in the box with the telephone as this won't work with a different telephone's cord.
Is there a trident symbol flashing in top left corner? if so, press menu, down to setting, press ok, down to handset setting, press ok, down to register, press ok, enter pin 0000, press ok and at the same time press and hold the handset locator button on the base station for 10 seconds.
1/4/2011 3:15:29 PM •
Xact...
•
60 views • 0 helpful votes
Please could you tell me how to delete all my
Hi there i am trying to fix my phone too. To delete the message via the handset use the tick button to select your menu choice and the volume up and down to scroll through the messages. Listen to messages and delete them all using the x secrecy button. Hope this helps.
7/19/2010 4:27:27 PM •
Xact...
•
358 views • 0 helpful votes
How can i delete messages on my BT Studio 1500?
go into menu, go to "play message", scroll down to "all messages" press the tick button, when the messages play press X (secrecy) button.
you have to delete them one by one
hope this helps
1/11/2009 10:15:58 AM •
Xact...
•
2,162 views • 42 helpful votes
BT Studio 1000 4 handsets
To Mrs Sue Groom,
You probably need to register the handsets to the base.This is the user manual for the BT Studio 1500
http://www.shop.bt.com/content/uni2/documentation/43py/023626.pdf
3/21/2008 8:06:00 PM •
Xact...
•
3,958 views • 10 helpful votes
No dial tone
this company sucks I call it and it just has automated features and hangs up where is the real customer service...
7/3/2008 1:16:15 PM •
Xact...
•
112 views • 0 helpful votes
I need help with phones
go to getxact.com and manual for the xg2201 will work for the xg2206. . .Theo
4/29/2008 1:36:59 AM •
Xact...
•
87 views • 0 helpful votes
GE 900mhz model 26936GE2-C
Sounds like a defective battery or low battery.
1. Have you replaced the battery?
2. Have you changed the channel?
3. Have you dropped it?
Answer these few questions and we'll see if we can figure it out.
Let me know.
2/18/2008 6:22:44 PM •
Xact...
•
380 views • 0 helpful votes
Handset has No link to base
I
was having the same problem with the same model phone, and fixed the problem by rebooting the phone – unplugging the
AC and phone cord from the base station and plugging both back it, then removing and replacing
the handset to regenerate the security code.
11/17/2007 4:21:49 PM •
Xact...
•
883 views • 3 helpful votes
Xact xg2400
I just bought the phone a couple of hours ago and i can't see any manuals in the box. I can't find one on the internet either.
PLS give a manual use for
Xact xg2400Thank you
9/4/2007 5:04:45 AM •
Xact...
•
415 views • 1 helpful votes
Caller id
see if this corrects the problem. . .press and hold menu/voice mail button to enter the menu. . .press the zero/oper button to go to the message waiting programming option. . then press the edit/flash button to reset tne Message Waiting Indicator. . "DEL" will begin flashing..press the redial/save/ pause button to delete this indicator.. . a long beep will sound to confirm a reset/removal of notification..press menu button to exit. Theo
5/31/2007 4:15:09 PM •
Xact...
•
280 views • 1 helpful votes
Handset ?No Link To Base? error and no dial tone
2/29 Have you registered or re-registered the handset?
"No link" can mean handset is not accepting radio wave of base unit. At Mfgr website pull-down operator's manual and look for registration instructions. Some sequence of buttons will create a radio signal from base (have handset off base) then another sequence of buttons on handset will accept radio signal. If handset has "menu" button, try "menu", then "00" (zero zero) then select an accept or "OK" button. Good luck.
1/14/2007 12:57:39 AM •
Xact...
•
2,960 views • 0 helpful votes
Volume Issue
To turn the volume for the voice, use the switch on the right side. It's labeled "Hi", "Mid", and "Low".
10/3/2006 5:44:47 PM •
Xact...
•
334 views • 0 helpful votes
Lost comunication
I solved this problem with a RESET of the handset.
Instructions from the Philips website:
Please perform a reset of your device. You will not loose your recorded data (phonebook and personal settings are being kept).
1. Unplug the mains of the base station.
2. Remove one of the batteries of each handset.
3. Put the batteries back in and re-plug the mains of the base station.
3/9/2006 7:18:57 AM •
Xact...
•
805 views • 2 helpful votes
Recharging phone constant beep
When misplaced in the charger the xg2200 beeps, are you sure the phone is placed correctly?
please let me know.
Good Luck
3/1/2006 6:43:37 AM •
Xact...
•
749 views • 0 helpful votes
Not finding what you are looking for?