Xact Communication Lands Phones - Page 2 - Recent Questions, Troubleshooting & Support
Lost comunication
I solved this problem with a RESET of the handset.
Instructions from the Philips website:
Please perform a reset of your device. You will not loose your recorded data (phonebook and personal settings are being kept).
1. Unplug the mains of the base station.
2. Remove one of the batteries of each handset.
3. Put the batteries back in and re-plug the mains of the base station.
6/6/2009 4:55:14 PM •
Xact...
•
Answered
on Jun 06, 2009
Handset ?No Link To Base? error and no dial tone
2/29 Have you registered or re-registered the handset?
"No link" can mean handset is not accepting radio wave of base unit. At Mfgr website pull-down operator's manual and look for registration instructions. Some sequence of buttons will create a radio signal from base (have handset off base) then another sequence of buttons on handset will accept radio signal. If handset has "menu" button, try "menu", then "00" (zero zero) then select an accept or "OK" button. Good luck.
4/22/2009 7:03:16 AM •
Xact...
•
Answered
on Apr 22, 2009
BT Studio 1000 4 handsets
To Mrs Sue Groom,
You probably need to register the handsets to the base.This is the user manual for the BT Studio 1500
http://www.shop.bt.com/content/uni2/documentation/43py/023626.pdf
2/11/2009 6:27:20 PM •
Xact...
•
Answered
on Feb 11, 2009
Recharging phone constant beep
When misplaced in the charger the xg2200 beeps, are you sure the phone is placed correctly?
please let me know.
Good Luck
9/3/2008 4:55:52 PM •
Xact...
•
Answered
on Sep 03, 2008
Caller id
see if this corrects the problem. . .press and hold menu/voice mail button to enter the menu. . .press the zero/oper button to go to the message waiting programming option. . then press the edit/flash button to reset tne Message Waiting Indicator. . "DEL" will begin flashing..press the redial/save/ pause button to delete this indicator.. . a long beep will sound to confirm a reset/removal of notification..press menu button to exit. Theo
8/15/2008 1:00:01 AM •
Xact...
•
Answered
on Aug 15, 2008
I need help with phones
go to getxact.com and manual for the xg2201 will work for the xg2206. . .Theo
8/15/2008 12:27:11 AM •
Xact...
•
Answered
on Aug 15, 2008
Xact xg2400
I just bought the phone a couple of hours ago and i can't see any manuals in the box. I can't find one on the internet either.
PLS give a manual use for
Xact xg2400Thank you
8/14/2008 1:54:43 PM •
Xact...
•
Answered
on Aug 14, 2008
No dial tone
this company sucks I call it and it just has automated features and hangs up where is the real customer service...
8/12/2008 2:02:43 PM •
Xact...
•
Answered
on Aug 12, 2008
GE 900mhz model 26936GE2-C
Sounds like a defective battery or low battery.
1. Have you replaced the battery?
2. Have you changed the channel?
3. Have you dropped it?
Answer these few questions and we'll see if we can figure it out.
Let me know.
3/2/2008 8:35:36 PM •
Xact...
•
Answered
on Mar 02, 2008
Handset has No link to base
I
was having the same problem with the same model phone, and fixed the problem by rebooting the phone – unplugging the
AC and phone cord from the base station and plugging both back it, then removing and replacing
the handset to regenerate the security code.
11/19/2007 7:13:13 PM •
Xact...
•
Answered
on Nov 19, 2007
Volume Issue
To turn the volume for the voice, use the switch on the right side. It's labeled "Hi", "Mid", and "Low".
12/7/2006 12:38:29 AM •
Xact...
•
Answered
on Dec 07, 2006
Not finding what you are looking for?