Satellite radio
I have several 'ghettoblasters' that fit this unit if interested --- Frank
9/17/2008 12:00:11 AM •
Xact...
•
Answered
on Sep 17, 2008
Recharging phone constant beep
When misplaced in the charger the xg2200 beeps, are you sure the phone is placed correctly?
please let me know.
Good Luck
9/3/2008 4:55:52 PM •
Xact...
•
Answered
on Sep 03, 2008
No antenna detected
More than likely, it is the antenna. Sad to say, but the Sirius antennas go bad very easily. Make sure there is no undue pressure on the antenna wire itself, as that can aide to premature failure. Bad antennas are the number one reason for the unit to read 'antenna not detected.' I have seen plenty of the antennas go bad and they were not misused one bit. If you contact Sirius, they're usually pretty good at understanding the misfortune of losing your paid service. Sometimes they'll ship you out a new antenna.
8/22/2008 1:27:52 AM •
Xact...
•
Answered
on Aug 22, 2008
Caller id
see if this corrects the problem. . .press and hold menu/voice mail button to enter the menu. . .press the zero/oper button to go to the message waiting programming option. . then press the edit/flash button to reset tne Message Waiting Indicator. . "DEL" will begin flashing..press the redial/save/ pause button to delete this indicator.. . a long beep will sound to confirm a reset/removal of notification..press menu button to exit. Theo
8/15/2008 1:00:01 AM •
Xact...
•
Answered
on Aug 15, 2008
I need help with phones
go to getxact.com and manual for the xg2201 will work for the xg2206. . .Theo
8/15/2008 12:27:11 AM •
Xact...
•
Answered
on Aug 15, 2008
Xact xg2400
I just bought the phone a couple of hours ago and i can't see any manuals in the box. I can't find one on the internet either.
PLS give a manual use for
Xact xg2400Thank you
8/14/2008 1:54:43 PM •
Xact...
•
Answered
on Aug 14, 2008
No dial tone
this company sucks I call it and it just has automated features and hangs up where is the real customer service...
8/12/2008 2:02:43 PM •
Xact...
•
Answered
on Aug 12, 2008
GE 900mhz model 26936GE2-C
Sounds like a defective battery or low battery.
1. Have you replaced the battery?
2. Have you changed the channel?
3. Have you dropped it?
Answer these few questions and we'll see if we can figure it out.
Let me know.
3/2/2008 8:35:36 PM •
Xact...
•
Answered
on Mar 02, 2008
Handset has No link to base
I
was having the same problem with the same model phone, and fixed the problem by rebooting the phone – unplugging the
AC and phone cord from the base station and plugging both back it, then removing and replacing
the handset to regenerate the security code.
11/19/2007 7:13:13 PM •
Xact...
•
Answered
on Nov 19, 2007
Dropped the unit, doesn't fully power on now
You would first have to open up the unit and look carefully and see what is maybe broken or out of place. Look for loose connections. Check damaged parts.
9/8/2007 2:41:44 AM •
Xact...
•
Answered
on Sep 08, 2007
Volume Issue
To turn the volume for the voice, use the switch on the right side. It's labeled "Hi", "Mid", and "Low".
12/7/2006 12:38:29 AM •
Xact...
•
Answered
on Dec 07, 2006
Not finding what you are looking for?