its the antenna problem.either the antenna itself is faulty.but if you have got the antenna checked and its proper then its problem with the connection of antenna.the place where antenna connects is got shorted or the antenna is not got conneted there properly.but if the antenna is old replace the antenna and check out. Sirius Radio boasts no commercial interruptions with its satellite radio subscription; but, from time to time there are interruptions in the signal. The good news is that problems are usually easy to solve. Most of the time, the solution is as simple as proper placement of the antenna or properly docking the Sirius Radio.
Signal Obstruction While Driving
When the "Acquiring Signal" message is displayed on your radio while driving, this means there's outside interference. This will usually be remedied as soon as you move through whatever source that is obstructing your signal, such as tunnels or overhangingtrees. If this is a frequent problem, ensure that your antenna is mounted somewhere high on your vehicle like your roof.
Signal Obstruction in Your Home
If you are having difficulty with your home receiver acquiring a signal, ensure that the antenna is mounted correctly. If you are using a Sirius indoor/outdoor**** shell antenna, try moving it to a window ledge or an open spot for clearer reception. If you are using an outdoor antenna, make sure it is mounted high on the roof where it is free from obstructions. A high, clear point is always the best placement for an antenna for optimal results.
Antenna Not Detected
If your display is telling you that your antenna is not connected, first make sure that the radio is locked into its dock completely. Once the radio is in its proper position, it should connect to the antenna and work properly. If it doesn't, take a look at the antenna wire itself to make sure it's connected to the receiver or docking station if you are listening at home. If it's still not working, check the wire and make sure that it is not damaged. If it has been damaged, replace the wire.
This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya.
The radio code is a security feature that's meant to deter theft, and it's unique to each vehicle. If you've lost your code, you'll need to contact a Nissan dealership or service center and provide proof of ownership. They should be able to help you retrieve the code. Please do not attempt to use codes from the internet as incorrect attempts may lock your radio.
First thing to do is check to make sure that the batteries are properly charged.
Second, make sure that you have a clear line-of-site to the IR transmitter. Infrared (IR) works the same way that your TVs remote control works - if the signal is blocked, then you will not hear any sound.
Third, make sure that you are in the rear seat of the vehicle when listening to the sound. The IR transmitter only transmits to the rear seat, so you will not hear any sound if you are sitting in the front seats. This is a common problem that i see.
Lastly, make sure that the heapdhones you purchased are compatible with your 2006 2007 2008 2009 or 2010 Toyota Sienna. Remember that some older models require RF headphones, not IR headphones. I checked http://www.audiovideo2go.com for compatibility before I purchased my headphones. They have a useful listing of all the headphones and models of vehicles they are compatible with.
Unfortunately, no one knows or is telling. Companies rarely state power in RMS because Peak Power is a much more impressive. 1000 watt amp, 200 watts RMS x 2 channels at 8 ohms. Look for a sticker on the unit.
https://www.google.com/search?q=Xplore+Amp+5553
..
'year make model' of the vehicle is needed in questions like this please?
Modern vehicle radios are controlled by the Body control Module (BCM) and are used for broadcasting warning beeps and indicator clickers. The beeps an be as innocuous as "do you know your radio is still on"? It can also be caused by your cellphone pinging local transmitters and receiving a confirmation back, or checking in for emails.
JustAnswerhttps://www.justanswer.com > Mercedes Repair
Aug 26, 2010 - What causes a beeping noise to come over the radio speakers? How can it be made to stop? - Answered by a verified Mercedes Mechanic.
1 answer · Top answer: Chat Conversation Started Pete : Hello,I will be glad to try and assist you with this,Welcome ...
Missing: periodic ' Show results with: periodic
iFixithttps://www.ifixit.com > Answers > View > Why+is+m...
Apr 6, 2019 - My speaker has suddenly began making a single sound every few seconds which sounds like a single busy signal on a phone. I have read the manual, ...
11 answers · Top answer: It's low on battery. Plug it in!
Answershttps://www.answers.com > Auto > Auto Parts
Oct 26, 2022 - Press the AS button and hold depressed while turning the radio on. (after 3 secs you should hear a beep. Release the AS button. The display ...
..
