X2 Recent Questions, Troubleshooting Help & Support

If you are referring to the power up access code screen that comes up when you first turn on your computer, it can be erased by removing the disc type button battery located on your motherboard. Make sure computer is un pluged from the power source. Remove the button battery for 30 seconds. Re-install it and power the computer up. It will boot up normally. If you are referring to a lock out of your Operating System, you will need to purchase a password recovery / reset program and load it into your computer during start up using the boot drive options selections located in your start up / set up menus. Its usually called: Boot Options or Boot Drive Options

The processor upgrades available to you depend on your particular system; in particular, the motherboard hardware and BIOS installed by your computer manufacturer. They do not depend on the processor you already have. 20.April.2014

orange light stably

use memroy card in other mobile if you can read it it imeans that the problem is in the phone

here you go my friend!http://nds1.nokia.com/phones/files/guides/Nokia_X2-00_UG_en.pdf

you can contact the service provider....

It may have dying power supply DC filter caps just like the rest of failed monitors here:

Failed TV and Monitors: http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you. Please post back what you find.

Straighten a paper clip and push it inside the small hole just above the open/close button while you press the button. You'll need to apply some force. This is usually caused when the gear inside the cd/dvd rom is not working properly or damaged. Good luck. Thanks for using FixYa.

17"?, may be not, it may be a learning tool on electronics repair.
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.
http://en.wikipedia.org/wiki/Capacitor_plague

http://www.badcaps.net

Either this is a overheating problem, need CPU fan for this. If this doesn't work, then it could be a hard drive problem. If not, then motherboard is probably going bad.

sounds to me like your missing audio and video codecs in the computer give this a try http://www.free-codecs.com/download/K_lite_codec_pack.htm

The chargin element is defualty and this unfortunitly is part of the motherboard logistics you will need to replace the element on the motherboard or the motherboard itslef witch can be costly.

Thanks and please leave postive feedback and ratings for your free answer today. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

I asked them

Do you mean you have forgoten your account login password?. If you have press Ctrl > Alt + Delete and enter you administrator passowrd. This should be administrator for username and password.

Once in click Start > Control Panel > User Accounts. Find your Username and change the password. Click Apply

Log Out and you should be able to log in with your new Passowrd.

If not change the password using your Operation System CD.

Hi

Send me more details about your motherboard & Operating System

Harry

This indicates either a problem with the monitor cable(ie shorted) or the display adapter. Try plugging the monitor into a different computer and if it works you will need to install a new display adapter in your computer. If it doewn't work on the new one either you can try a different monitor cable if yours isn't permanently connected. Hope this helps