Worx Popular Questions, Answers, Tips & Manuals

pull locking sleeve back as shown on page 3 of instructions. pick up a can of PB blaster dry lube spray can at HD and spray some around bir. https://www.manua.ls/worx/wx176l/manual?p=3

Details for a trimmer which gives ideas. https://www.amazon.com/ask/questions/Tx1KNHDE1SNJNYO/ click the images tab to see the label. https://www.google.com/search?q=worx+wg261+serial+number+location ..

We need model numbers for questions like this, so generic advice and videos. https://www.google.com/search?q=remove+the+spool+holder+on+my+Worx+trimmer& ..

ck out this video...https://www.google.com/search?q=spool+holder+on++worx+edger/+trimmer+keeps+unscrewing+itself&newwindow=1&sxsrf=APwXEdfauQkwFmaCtC3ubVCJYTpRDnvb2Q:1687901890446&source=lnms&sa=X&ved=2ahUKEwj70uHEtOT_AhXEg4kEHYYZAUQQ0pQJegQIDxAC&biw=1280&bih=567&dpr=1.5#kpvalbx=_NVebZNnDOImgptQP9a-08Ao_9woops..my bad. you'll have to copy and paste the link. ):

Have you checked that the vacuum tube is secure? There will be a safety switch that the vacuum tube engages with so that it can only be used when the pipe is secured to prevent injury.

https://www.youtube.com/watch?v=i7FvKgWHhik

Category moved from Cars and Trucks. You will need to contact them direct for the part, or claim on the warranty Chris. The warranty is 3 years. https://www.worx.com/en_CA/contact/ ..

It should be on the name, model, serial number, country of origin, sticker. Plus it is on the box it came in, which you kept in case it had to be returned.

try a dealer that sells WORX pole saws

. It's very simple. You press the button on top of the trimmer. Once you press the hand grip and the top button simultaneously, you NO LONGER have to hold down the top button with with your thumb. Once you release the hand grip, you must depress the top button again. This is a SAFETY measure, so the trimmer doesn't run without a contribution from the operator

will need a meter to test wiring -since fuse was blown possible short or damage to wiring

Carb needs adjjusred probably

use silicone spray instead. it lasts longer

warranty it dont try to fix it

I have seen on YouTube a video how to fix a chainsaw that is leaking oil. In all but very exceptional cases there is nothing wrong at all with your chainsaw and it is fine and what appears to be an oil leakage is simply oil that has sprayed out from the chain as it is rotating at high speeds draining from the saw body and guide bar.

Batteries are capable of telling lies and fooling a charger, even a modern so-called intelligent charger. The only reliable way to test a power tool battery is testing the voltage under load. 2 years old and it is now the third winter your snow blower is seeing and two summers - I wonder what you did with the battery during those summers? Batteries hate being less than fully charged and a battery that is less than fully charged for many months will emerge less than optimum and even possibly useless. Modern lithium batteries don't like being completely discharged because when recharged with a fast charger they get quite warm and it is the heat that tends to shorten their lives... If any of this seems familiar - your battery is probably faulty.

Read owner book and lubricate. View safety first n dont rush

go to web site

can be also if more load put on it from trimmer --keep clean dont let debris tangle around shaft head

May be a defective battery....Worx chargers aren't trickle- down so you can't leave the battery plugged into the charger when it's fully charged