Williams Popular Questions, Answers, Tips & Manuals

Yes it sounds like it does. There should be no carbon monoxide in the environment. I am sure you know how dangerous CO is? Can your gas utility company or a registered gas technician to check it. The heat exchanger should be a replaceable part.

bad 2 speed relay

That probably means too much fuel or not enough air for correct combustion to take place. I would check its settings.

Question moved from Misc. If it is brand new it is under warranty. Your gas registered installer should have seen it fully working before he left. https://www.google.com/search?q=Williams+direct+vent+wall+furnace+3003822%2C+pilot+goes+out+when+thermostat+turned+on ..

Please, never bypass safety features. They are made to cycle and will still cycle if you bypass until it locks out on overheat.

Hi, the next best thing to do would be to submit a quote to an hvac company and put a test valve that you've found within the quote. The company might then update you with the true replacement valve model if your valve is incorrect. Or you can reach out to a sell of your heating product on ebay and ask them if they can sell you that valve or any compatible replacement. Thank you.

https://www.amazon.com/Williams-Sonoma-Bread-Machine-Manual/dp/B00QMU56UQ

As long as it functions to ur needs. Search utube or pinterest for maintenance videos. Ur library sec600 has repair manuals

have you had gas pressure checked?

See if it visually the same as what you have. All parts for yours are obsolete.

Williams Furnace Company P322398 Pilot Generator ...

https://williamsfurnace.parts > williams-furnace-compan... Natural Gas Model numbers include 1403822, 2003822 and 3003822, and can be used with all altitude options. Click here to download the replacement parts lists ... US$65.55 · ‎In stock https://www.searspartsdirect.com/model/ydhrgebuqn-001203/williams-3003622-wall-heater-parts ..

I take it you are looking to buy a new valve ? if so just take picture of it and take it with you .

https://www.ecomfort.com/Williams-3509822/p67976.html https://www.bakerdist.com/williams-furnace-3509622-monterey-gravity-top-vent-furnace--78f946c These are the spec sheets it mostly in the height width depth and 9622 can be double sided do 2 rooms

Thermostat problem not coming on on temp fall bridge out stat and see if it lights

Most likely the safety thermocouple has failed though it is possible the bulb or the pilot light has slipped out of position and the pilot flame is no longer heating the bulb.

Check flame sensor is clean check connection to thermocouple , check thermocouple is not brunt out at the tip

call whoever installed unit for repair or replacement. homeowners should not work on or install gas furnaces.

check to see if the little fan near the pilot is running. You should hear the burring of the fan when you try to light the furnace if you stand near. if you can't hear the fan running, pull off the cover check the fan for debris, rust, or the motor may have stopped working. Check the fan should be your next step.

I believe they were manufactured by Marlin in the 1950's and later models were manufactured by Winchester Sears put there label on them they are great little rifles. There was the semi-auto and there was a pump rifle. I have a pump that was used by my father in law and that rifle brought in some huge gators. I have put close to 500 rounds threw it and you can drive nails at 50 yds with it. I collect all kinds of firearms and recently flipped one cashing in at $250 for it.have a gr8 day and fun shooting that jewel.

You will need to remove the burner and then you can gain access to the pilot assembly, it sounds like the pilot is rusted and falling apart, it is recommended to replace the pilot assembly. These direct wall units need maintenance before the call season and after for them to work efficiently

If you gave me a model # I could help you. Most of them do for your safety. Its there to shut the burner off if its not venting properly.