Whynter Recent Questions, Troubleshooting Help & Support

High pressure. Watch this u tube video https://www.youtube.com/watch?v=AiEgnDwwd6s

Sounds like a bad or stuck reversing valve. Typically r.vs. are energized in cooling, verify 24 volts to valve, if yes , bad valve If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79

Thermostat needs replacing. Can`t find one online but I would guess a standard Danfoss would do it.

Defective thermostat maybe.

unplug for couple of minutes for thermostat to reset then plug it back

check control setting

Please follow the ink to the user manual. http://www.whynter.com/Upload/ProductManuals/Whynter%20IMC-270MB%20Portable%20Ice%20Maker%20User%20Manual%202015.pdf

The heating and cooling sections are separate..these are not known to last very long. Sorry. (check the switches though - does the indicater light come on?)

Check out this site for your board. www.ambientstores.com/ProductDetail/Refrigeration_/_...Parts/606

This is due to the detrioting condition of the display, sometimes an even lite press with fingers on the display may help. This happens due to loss of contacts inside due to poor quality of display or aging.