My Dynalink ADSL2 RTA1320 Modem keeps
In Device Manager, and under Network Adapters, open the Properties of your network connection card, click Power Management, and deselect anything that is checked. That should keep the card from shutting down in sleep mode.
Also shut off the router, wait a few seconds, and restart. Make sure nothing is blocking the router; it needs to cool through convection. You could try blowing a small fan across the modem and router to see if that helps cool them.
3/8/2018 1:12:03 PM •
Westell...
•
198 views • 0 helpful votes
Modem is in bridge mode,
I would reset the router and start over. hold the reset button on the router for 10 seconds to restore factory defaults.
2/17/2018 8:21:03 PM •
Westell...
•
68 views • 0 helpful votes
Access to internet is intermittent.
I would check your DSL device first. Routers just send the signal out. The DSL device is what really controls everything you receive or send out.
11/30/2017 3:03:03 PM •
Westell...
•
173 views • 0 helpful votes
Not really a problem...yet...I have Verizon and
If your object is to get Netflix on your TV, and not knowing what brand or model TV you have nor whether or not you have an existing wi-fi system, that question is a little difficult to answer. For example, I have Suddenlink cable, wi-fi, and can access Netflix and other similar providers through either my TV or TiVo, although I always go through TiVo. You may need to update your TV.
9/18/2017 4:33:03 AM •
Westell...
•
96 views • 0 helpful votes
Modem installation
It is not a lost cause BUT you will have major issues connecting to most websites because the browsers are so advanced now that if you connect, it wont display correctly and there is an issue with some secure servers rejecting you because the operating system can be read and the server wont allow the connection.
http://www.dslreports.com/faq/bellsouth/3.14_Westell_2100_2200_6100_Info#7342
7/26/2017 12:36:03 AM •
Westell...
•
65 views • 0 helpful votes
How do I reset the password for my router ?
At the back of your router there is a small pinhole with the word "reset" printed just below the pinhole. Use a paperclip push it softly into the pinhole until you feel it makes contact with this switch, press in and hold for 3 to 5 seconds. That will do the trick. Cheers HoT.
7/16/2014 2:29:58 AM •
Westell...
•
71 views • 0 helpful votes
I need to change the password on my verizon router I do not have verizon internet can you please help me ?
It is clear you have not setup encryption within the router. You need to access your router, go into the router setup and setup security normal wpa2 or wep pending your computers and operating system in use. It will ask you for a secret passkey to enter. Without having this setup any one can cannot to your wireless router. But once the passkey has been setup only you will be able to access it. Very easy fix. if your do not know how to access your router control follow the instruction manual that cam with it, it is normally well explained or just contact me again. regards Hands of Time.
7/16/2014 2:21:20 AM •
Westell...
•
66 views • 0 helpful votes
Forgot ssid password
Where are you entering it? (In the router it should be) and simply enter "change password" you will then need to enter this new P/W into your laptop / PDA / iPhone etc.
1/19/2014 5:16:55 PM •
Westell...
•
89 views • 0 helpful votes
Pilot buttom broken off of american hot water
The title of your inquiry contains router Westell Wirespeed ProLine 6100. Your question appears to be related to a hot water heater. You may want to revise and resubmit your inquiry so that it is placed in the correct water heater section as the router section appears to be the incorrect place.
10/13/2013 5:27:46 PM •
Westell...
•
61 views • 0 helpful votes
Westell 7500 set up guide
modems are not routers. Routers can port forward. You need your WAN to face your ISP, and your LAN will need to face your router. Once you have your router talking to your ISP you can set it up to hand out interal network services, but I doubt SOHO routers will do port forwarding. Routers, however, can do port translation like passing gaming traffic over port 80 (web). You can do that in the security tab on your linksys.
1/13/2013 8:14:56 AM •
Westell...
•
263 views • 0 helpful votes
Not finding what you are looking for?