Scope is out of focus
You focus on the reticle with the eye focus ring. You need a parallax adjustment ring to "focus" a scope. Your scope does not have this feature. Are you trying to use it at a very short distance?
Need address to scope for repair
Here is the link to the Weaver Optics Support page with the warranty repair instructions:
http://www.weaveroptics.com/general/warranty/
Just use your mouse to click on the link, which is the underlined and highlighted text just above. This will open a new web browser page automatically for you and allow you to view the information at the website indicated.
I hope that was helpful to you, good luck and take care.
Joe.
Unit does not turn,I think it needs a
Jemenie!!! Apparently Weaver doesn't know what to do. Call the big boss and give a ear full.
It could be a bad switch, broken wire, bad image tube, faulty ccfl inverter, multiplier. Without some troubling shooting it, it is impossible to tell. stewbison
How to readjust a weaver mount?
Make sure the nuts are on the same side of the rifle (both on the right OR left). The clamping mechanism can vary the centering of the scope if they are on opposite sides of the mount.
The other problem may be poorly drilled mounting holes on the receiver or scope mount, check these for alignment with your bore or barrel.
Not finding what you are looking for?