What gas to buy?
used or new? if new the coleman will fit push in and turn at the same time the small fine threads have to mesh properly.
If used they may have converted it to a 20lb tank if so unscrew the adapter then hook up your little tank.
hope this helps
Cold fog
Go on line and build your own fob chiller, just load it with ice and it will keep your fog closer to the ground.
Hi
how can i edit my
You must post a new quesiton OR post a followup comment to your question. Only FisYa.com can edit.
You could send them an e-mail ... see the contact us page for the address.
While sighting in rifle with new scope the cross
Is the scope moving in the mounts? Going back and forth, left and right? If so, tighten up the screws, Or are the stadia wires themselves spinning around inside the scope? That could be a problem. The wires are fixed in a tube that is mounted at the rear, the front is at the adj screws, they push back and forth on a spring, the whole tube moves, but it is not supposed to spin. You can get to this part easy enough, but go no farther than the cross hairs. Find out what they are supposed to be attached to, or just send the whole thing back and complain. If you break the seal, they will never honor the warranty if there is one. Hope this helps.
Not finding what you are looking for?
