Villeroy & Boch Recent Questions, Troubleshooting Help & Support

look under at the back of the pan where the seat sits you can see or feel the nuts to tighten the seat .

Mr Clean magic eraser. Its a white sponge. It works.

Since no one welds part back together (unless you can) so you will have to buy them, but I suggest you call the manufacturer as they will send you the needed parts for free.

I found all those parts at Lowes.

attach 2X4s behind it to ensure its stable. I had same problem but used that wood to reinforce it (covered with hardy board & paint) and reattached it and wall is very strong and toilet does not move.

online by asking same question on web.

super glue ? Not the gel stuff

You will need to remove the toilet and access the bolts from inside the enclosure. It is a dirty job.... good luck!

Can you describe the issue at hand a little more?

• What were you doing when it quit?
• How does it normally turn on/off?
• What do the controls look like to turn the tub on?

Rod US Parts Center 888-521-6183