Versace Popular Questions, Answers, Tips & Manuals

no probably not it needs a new case! i would try to return to manufacturer

self winging uses the movement of arm to wind --- chack with company since you do not know the correct model or do an online search usong make and model

Please Contact [email protected] with model number of your warch also image of your watch

These guys can get authentic lenses and earpieces for Versace glasses. Send them a message here http://stores.sunglassreplacementlenses.com/contact-us/

Frame Size: 65MM 17MM 125MM

Typically there will be three standard numbers imprinted on one of the temples or the bridge, indicating respectively the sizes of three frame parts. All sizes are marked in millimeter.
1. Lens size: The first number 65 represents the lens size, which is also called eye size or lens width. Lens width is the most exact name of this size, describing precisely the distance between the vertical sides of a rectangle containing the lens shape. It is important to differentiate it from lens height. A large lens for a big guy usually has big sizes at both dimensions.
2. Bridge length: The second number 17 represents the bridge size. Other sayings include bridge length and bridge width. In detail, it is the minimum horizontal distance between the nasal surfaces of the rims. This size varies only slightly because people's noses will hardly differ significantly. When the frame is sitting too high on the face, it is necessary to increase this bridge size. In opposite, a shorter bridge is needed when the frame sits too low on the face.
3. Arm length: The third number 1125 describes the length of an arm or temple. This is the whole length of a temple, consisting of the length to the bend and the length of the drop.

Depending on how they broke, us can use very strong glue or you can get a replacement piece, but more is needed to know exactly.

Hi bringguth,

I would send your watch to a Versace certified repair place to do the work on it.

I did a google search and found a couple of sites that work on Versace watches. This first one is definitely V certified: >>>> http://www.saltzmans-watches.com/services.html Copy and paste this address into your browser and the repair page will open up for you.

Here is another: >>>> http://www.watchrepairsusa.com/versace/watch-repair
Good luck.

Hope this helps. If it does, I'd appreciate your vote. Thanks,

Handie Andie

Hi Glendo_01

 

Go to www.sunglassreplacementlenses.com and fill out the contact form.  The can get original parts for most Versace's and the ship to Australia.

hi
usally the branded sunglasses lens are made with high quality to protect the eyes .the fakes one dont use it . so it better approach the dealer who deals with this brand i am sure he will know it easily .

If you are happy with my answer please vote four thumbs up. Thank you

Thanks for contacting FixYa.
I am sorry. The only place to get a Versace replacment is thru Versace.
My only other advice would be to do an internet search and look for a less expensive replacement of the watch itself.
I know thats not what you want to hear. Best regards.
Jewel

I could not find your model on their web site but looking at the ones they had there, if it says "automatic" on the face then it is spring driven and absence of "automatic" seems to mean it is battery driven.

I hope this helps.

It sounds like the battery low you suggested.

Take the watch to a Versace service center ( there can be difficulties if you try to replace it yourself or get a local jeweler to replace the battery- it is a comon complaint that watches fail after battery renewal!).

mcdevito75 here, Double check case and back cover line up, Clean mateing surfaces with a little alcohol and a Q"tip. The back cover may have gotton very warm and is now just a little to big for the case, temperature could cause the back cover to be so very slightly too large to fit the case, make sure both the case and back cover are the same temperature. I"ve does this myself, place the cover in the frig. for about an hour, this will make the back cover just a bit smaller than the case then try to re-fit the cover onto the case. If this fails, look for a small watch repair shop in your area. Just the cover in the fig. (lower section) not the case, the cold will shrink the cover and possibly give a better fit to the case.

mcdevito75 here, Ebay could help but you:ll need the strap size in MM, or you look for a small watch repair shop in your area to save on the cost.

Could be a number of issues but if the watch was closed correctly and hasnt gotten wet then it probably needs a dab of watch oil and a spin.

Everyday we get this issue. Customer gets new battery but the hands dont move. Its possible that its running electronically but not mechanically. As the watch ages the watch oil begins to lose viscosity and thickens and there is no torque in a watch movement so the hands wont move! So by adding a drop of oil and putting it on a clyclonic machine to force the hands to spin with a magnetic field it releases the stuck hands and the oil is released into the movement to lubricate the wheels! :-)

So, you should find a reputable watch repair business and have them recheck the battery and if they have a cyclonic machine then they should be able to see if the watch has that "beat" that comes off of the magnetic rotor! :-) If the o-ring or seal has been damaged and moisture has gotten into the watch then they can dry it out under a warm light with the case back removed and reoil the movement! Hopefully this will help!

You can also take it back to where it was purchased and they might be able to assist you with repair as well.

you can find an exper in the local shop where you buy the product and they will give you specific service for your questions about your product.

In addition, and i like to play world of warcraft. there is a reliable website for

all players to buy world of warcraft gold with the lowest price wihit in 10 minutes' fast delivery and you also can enjoy first class service when your login.

Well i am going to roll the dice and assume you have one of the ez clasps but if I am wrong you can send the model number and we will figure it out.

To adjust the ez clasp pull up on the front of the clasp loop while pushing down on the band. Rather than the traditional buckle and prong set up, the prong here is underneath the clasp loop.

Hope this helps. Thanks!

Same place where you bought the watch, mate, same place where you bought the watch. Surely the watch is a Versage but the wrist band can be any band you can find at any good watchmaker of jeweller. ;)

good after noon,to set the time and is depend on the model of your watch,if your watch is analog use the crown to set the time and date just pull the crown slowly and wind it,but if your watch is digital use the button to set the time,thank you !....

I don't know where you can get an instruction manual but have you tried pulling out the crown where you set the watch half a click. After you do that turn the crown away from you to set the day and towards you to set the month.