Veo Logo

Veo Popular Questions, Answers, Tips & Manuals

Do you work here? Claim your company

  • 23 Products
  • 2K Answers
  • 131K Views
0helpful
1answer

Can VEO 333VB32X connect to windows 10?

Yes it can connect at the top of window it show camera access for this device is on if it is off made it on .If camera access if off you cannot connect webcam and camera to your system and application
6/12/2021 8:31:10 AM • Veo Computers &... • 58 views • 0 helpful votes
0helpful
2answers

Hello I have an canon

There is nothing you can do to effect repairs on this, you will either have to replace it or send it back to Canon for an exchange unit.
7/20/2017 9:33:03 PM • Veo Capture 315S... • 86 views • 0 helpful votes
0helpful
1answer

How do u fix a local area connection doesnt have a valid ip

If it is a Windows machine, obtain a Command window (procedure varies by version) and try entering these lines (note the space before the slash) ipconfig /release ipconfig /renew exit it will work for a specific fault, however it could also be that -your router needs rebooting. Power off for 30 sec, then on - you have a faulty network card
10/14/2014 10:55:23 AM • Veo Connect... • 81 views • 0 helpful votes
0helpful
1answer

Veo observer mac

http://veo-observer.software.filedudes.com/mac/
7/12/2014 11:52:54 AM • Veo Observer... • 83 views • 0 helpful votes
0helpful
2answers

Need web cam drivers

i have require driver or software of frontech e-cam model no: jil-2214
11/12/2013 12:18:24 AM • Veo Mobile... • 120 views • 0 helpful votes
0helpful
1answer

Is user name different than user ID, password etc

they same
10/30/2013 1:42:01 AM • Veo Observer... • 47 views • 0 helpful votes
0helpful
1answer

Mcp73t m5 v1 0

i like
7/17/2013 1:04:47 PM • Veo Computers &... • 120 views • 0 helpful votes
0helpful
1answer

Why am i getting an error message

this is the most solution:: I had the same problem:"Click on Start->Control Panel->Add or Remove Programs and uninstall the Veo Stingray software driver. Also, uninstall the Veo Digital Studio. Unplug the Veo Stingray from the computer. IMPORTANT! If you are connected to the Internet (such as through a dial-up modem or cable modem/DSL) log off from your Internet Service Provider and disconnect any telephone cords or Ethernet/Network cables from your computer. This will prevent Microsoft Windows Update from attempting to update your Veo Stingray software driver through Microsoft Windows Update. Place your Veo Stingray CD ROM into your computer. Click on Start->My Computer. Look for your Veo Stingray CD ROM drive. Right-click on the Veo Stingray CD ROM icon and then select Open. Go to the E:\DRIVERS\APPBIN folder and double-click on a file named cleanup. (You can also download the cleanup file from: ftp://home.fiasj.net/xirlink/ibm/ibmcleanup.exe) In the cleanup program, press the "Scan and Delete" button in order for it to begin. After the cleanup program has finished, click the "Exit" button and restart the computer. Reinstall the Veo Stingray from the CD ROM, restart the computer, and plug in the camera after the computer has restarted.good luck!
5/6/2013 11:13:58 PM • Veo Advanced... • 197 views • 0 helpful votes
0helpful
1answer

Need download for Veo Stingray web cam

1st You download Webcam Driver.Need download for Veo Stingray web camAfter this install the Webcam driver in the system.Installation of Webcam DriverGo to the control panelClick on the System IconClick on the Hardware TabClick on the Device Manager sSelect the Unknown Device or printer device where yellow Question Marks sign on it.Right click on it and uninstall it.After this go to the top of the device manager and click on scan for hardware changes.Driver installation Wizard start.Brows Your Driver from the Hard Disk and click on next.Driver will be install.
2/15/2013 10:00:05 PM • Veo Stingray USB... • 411 views • 0 helpful votes
1helpful
1answer

Drivers for veo network camera

Click start control panel view devices and printers you should see your webcam from there if you are have trouble with your webcam Click start control panel administrative tools computer management device manager scroll down image devices you could see a yellow question mark? right click to reinstall drivers or update driver xp Click start right click on computer select properties device manager scroll to image devices expand right click to update driver in W7 http://download.cnet.com/2000-20_4.html on the home page you should see a search tab just type in what you are looking for IE: webcam name webcam driver you might have to try a few times to get it right software if you dont have the driver you will need to download one here rather doing a driver hunt which can take hours http://download.cnet.com/slimdrivers-free/3000-18513_4-75279940.html Windows XP/Vista/7/8 It might take some time being a freeware driver solution note: it will find all of your outdated drivers this is a free driver solutions This will automatically search for and find the correct driver you will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point click no to both of these then continue updating each driver free then restart once all of the drivers have been updated Some webcams and programs require additional software, although that should be installed with the webcam if things are right. But is does not harm to check if your Java, Flash and Quicktime software are installed and up to date. But certainly check your DirectX software, since all video applications, including webcams, use DirectX for video processing. Try downloading the latest DirectX version and install it (Windows XP: DirectX 9.0c - Windows Vista: DirectX 10). http://windows.microsoft.com/en-US/windows7/Which-version-of-DirectX-is-on-your-computer If you still have no webcam installed Run the "Add a device"application, accessed by clicking on the "Start" button, opening the "Control Panel," and then double-clicking on "Add a device." The "Add a device" window will open and Windows will search for devices connected to your system but not installed. Click on the webcam name that shows in the search box and then click "Next." Choose whether you want Windows to search for the webcam device driver using Windows Update over the Internet, or if you'd prefer to have the device manager search for the driver using a disc supplied by your laptop manufacturer. Most drivers can be found on the system recovery disc included with your laptop, if you choose to add the driver from the provided disc. Place a check in the box next to your choice and then click "Next>" to continue. Wait while Windows searches from the driver using Windows Update, if this was your choice. An active Internet connection is required for Windows to successfully do this. Allow the computer to install the driver and then reboot the system for the webcam to become recognized by the system. Otherwise, you can use the system recovery disc or a driver downloaded directly from your laptop manufacturer to install the driver without using the Windows Update search feature. Open the CD/DVD-ROM drive and insert the system recovery disc, or place the driver downloaded from the manufacturer in an easily accessed file directory on your PC, such as on the desktop, or in your "My Documents" folder. Choose the option "Install the software automatically (Recommended)" in the "Add a device" application, and press "Next>" to begin searching for your webcam driver. The hardware wizard will search the system recovery disc and install the driver automatically. Press "Finish" to close the wizard and then reboot the computer to allow recognition of the webcam. Choose the option "Install the software manually" in order to browse to the driver location where you saved the driver and install it from there. Use the opened file manager and locate the driver. Click the "Next>" button to install the driver, then reboot the computer to add webcam functionality.
2/11/2013 6:45:01 PM • Veo Observer XT... • 210 views • 1 helpful votes
1helpful
1answer

I need a driver for my veo stingray 330V

1st You download Webcam Driver.I need a driver for my veo stingray 330VAfter this install the Webcam driver in the system.Installation of Webcam DriverGo to the control panelClick on the System IconClick on the Hardware TabClick on the Device Manager sSelect the Unknown Device or printer device where yellow Question Marks sign on it.Right click on it and uninstall it.After this go to the top of the device manager and click on scan for hardware changes.Driver installation Wizard start.Brows Your Driver from the Hard Disk and click on next.Driver will be install.
12/31/2012 3:24:56 AM • Veo Stingray • 459 views • 1 helpful votes
0helpful
1answer

Need vero stingray driver for mac

1st You download Webcam Driver.Need vero stingray driver for macAfter this install the Webcam driver in the system.Installation of Webcam DriverGo to the control panelClick on the System IconClick on the Hardware TabClick on the Device Manager sSelect the Unknown Device or printer device where yellow Question Marks sign on it.Right click on it and uninstall it.After this go to the top of the device manager and click on scan for hardware changes.Driver installation Wizard start.Brows Your Driver from the Hard Disk and click on next.Driver will be install.
12/8/2012 10:09:06 PM • Veo Advanced... • 600 views • 0 helpful votes
0helpful
1answer

Whats the hostname or ip number

Read this, please:http://www.manualslib.com/manual/185934/Veo-Observer.htmlhttp://www.kahunaburger.com/2004/02/22/binary-for-veo-observer-snapshot-tool/
1/24/2013 12:00:36 AM • Veo Observer... • 66 views • 0 helpful votes
0helpful
1answer

Download for Veo Stingraywebcam.com

1st You download Webcam Driver.Download for Veo Stingraywebcam.comAfter this install the Webcam driver in the system.Installation of Webcam DriverGo to the control panelClick on the System IconClick on the Hardware TabClick on the Device Manager sSelect the Unknown Device or printer device where yellow Question Marks sign on it.Right click on it and uninstall it.After this go to the top of the device manager and click on scan for hardware changes.Driver installation Wizard start.Brows Your Driver from the Hard Disk and click on next.Driver will be install.
2/15/2013 9:55:32 PM • Veo Stingray • 32 views • 0 helpful votes
0helpful
1answer

What do i do if i dont hve the disc to install my veo web cam???

1st You download Webcam Driver.What do i do if i dont hve the disc to install my veo web cam???After this install the Webcam driver in the system.Installation of Webcam DriverGo to the control panelClick on the System IconClick on the Hardware TabClick on the Device Manager sSelect the Unknown Device or printer device where yellow Question Marks sign on it.Right click on it and uninstall it.After this go to the top of the device manager and click on scan for hardware changes.Driver installation Wizard start.Brows Your Driver from the Hard Disk and click on next.Driver will be install.
1/2/2013 2:14:33 AM • Veo Computers &... • 85 views • 0 helpful votes
0helpful
1answer

304vb27x

Click start control panel view devices and printers you should see your webcam from there if you are have trouble with your webcam Click start control panel administrative tools computer management device manager scroll down image devices you could see a yellow question mark? right click to reinstall drivers or update driver xp Click start right click on computer select properties device manager scroll to image devices expand right click to update driver in W7 http://download.cnet.com/2000-20_4.html on the home page you should see a search tab just type in what you are looking for IE: webcam name webcam driver you might have to try a few times to get it right software if you dont have the driver you will need to download one here rather doing a driver hunt which can take hours http://download.cnet.com/slimdrivers-free/3000-18513_4-75279940.html Windows XP/Vista/7/8 It might take some time being a freeware driver solution note: it will find all of your outdated drivers this is a free driver solutions This will automatically search for and find the correct driver you will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point click no to both of these then continue updating each driver free then restart once all of the drivers have been updated Some webcams and programs require additional software, although that should be installed with the webcam if things are right. But is does not harm to check if your Java, Flash and Quicktime software are installed and up to date. But certainly check your DirectX software, since all video applications, including webcams, use DirectX for video processing. Try downloading the latest DirectX version and install it (Windows XP: DirectX 9.0c - Windows Vista: DirectX 10). http://windows.microsoft.com/en-US/windows7/Which-version-of-DirectX-is-on-your-computer If you still have no webcam installed Run the "Add a device"application, accessed by clicking on the "Start" button, opening the "Control Panel," and then double-clicking on "Add a device." The "Add a device" window will open and Windows will search for devices connected to your system but not installed. Click on the webcam name that shows in the search box and then click "Next." Choose whether you want Windows to search for the webcam device driver using Windows Update over the Internet, or if you'd prefer to have the device manager search for the driver using a disc supplied by your laptop manufacturer. Most drivers can be found on the system recovery disc included with your laptop, if you choose to add the driver from the provided disc. Place a check in the box next to your choice and then click "Next>" to continue. Wait while Windows searches from the driver using Windows Update, if this was your choice. An active Internet connection is required for Windows to successfully do this. Allow the computer to install the driver and then reboot the system for the webcam to become recognized by the system. Otherwise, you can use the system recovery disc or a driver downloaded directly from your laptop manufacturer to install the driver without using the Windows Update search feature. Open the CD/DVD-ROM drive and insert the system recovery disc, or place the driver downloaded from the manufacturer in an easily accessed file directory on your PC, such as on the desktop, or in your "My Documents" folder. Choose the option "Install the software automatically (Recommended)" in the "Add a device" application, and press "Next>" to begin searching for your webcam driver. The hardware wizard will search the system recovery disc and install the driver automatically. Press "Finish" to close the wizard and then reboot the computer to allow recognition of the webcam. Choose the option "Install the software manually" in order to browse to the driver location where you saved the driver and install it from there. Use the opened file manager and locate the driver. Click the "Next>" button to install the driver, then reboot the computer to add webcam functionality. Hope this helps.
1/21/2013 5:46:48 PM • Veo Stingray • 27 views • 0 helpful votes
0helpful
1answer

Driver veo 650vs21x

Go to the manufacturer's website and download the necessary driver for your specific model. dd831a34-9bd5-4fcd-bf99-c101ea81719b-uirlbmmdnsc10qdkrvpu2msd-3-0.jpeg
8/8/2012 9:28:28 PM • Veo Observer... • 137 views • 0 helpful votes
0helpful
1answer

How to istall it

I will send you a free copy, or the .iso file if you prefer, of the VEO Advanced Connect installation CD & Bundled Software (for '98/Me/2000/XP if you do not have the drivers required. Email me at: [email protected] Once you have the installation CD: (A) If you have attempted any installations before that didn't work properly or only worked partially, uninstall them at this time. (B) Clean your registry with CCleaner or equivalent. (C) Restart your computer and (D) Install Drivers from Veo CD-ROM, using Auto-run, and following the simple prompts. (E) Once installation is complete, Open Veo Digital Studio from Start Menu or Desktop icon, and Click on "Record a Video". (F) You will then be prompted to connect camera to USB, at which point all device, video, and audio drivers for the camera will be automatically installed in a few seconds, and your camera will then be fully functional. The whole process takes about 1-1/2 minutes.
7/25/2012 3:55:52 AM • Veo Advanced... • 108 views • 0 helpful votes
0helpful
1answer

How to get softwear for windows xp for veo stingray 330v without the cd

cd crack icon paste in program files -in camera software. then you can run without cd.
5/29/2012 1:36:05 AM • Veo Stingray • 159 views • 0 helpful votes
0helpful
1answer

How to install a veo stingray cam on a windows xp 7

VEO333VB3BX
6/2/2012 9:39:06 PM • Veo Stingray • 82 views • 0 helpful votes
Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Veo Experts

ExpressFiX
ExpressFiX

Level 2 Expert

691 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Veo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...