Venmar Popular Questions, Answers, Tips & Manuals

Question edited for clarity. Question moved from Cars and Trucks Category to Venmar Kitchen Ranges and Hoods. They make dozens of models so impossible to guess what type you have. They are expensive so contact the make for Warranty Support. It is likely to be the Switch Panel / Control Board. https://www.google.com/search?q=Venmar+range+hood ..

[PDF]Download - Venmar

www.venmar.ca/DATA/.../131_5_en~v~Installation_Manual.pdf

Before servicing or cleaning unit, switch power off at ... solid-state speed controldevice. 8. ... should not be allowed to accumulate on fan, filters or in .... We recommend to install the hood at a minimum distance of 24" from an electric range and.

FAQ - Venmar

www.venmar.ca/en-faq.html

Can I use other controls than Venmar controls with my unit? What is the ... Range Hoods. Can I replace an "over-the-range" microwave with a range hood? ... VenmarConnaisseur C270 and C600M · Rocker switch control. Venmar V10 ...

Range Vent Hood Switch Parts In Stock from RepairClinic.com

www.repairclinic.com/Shop-For-Parts/.../Range-Vent-Hood-Switch-Parts

Shop for your Range Vent Hood Switch from our huge inventory. Check our ... RepairHelp for Range Vent Hoods ..... Blower variable speed control switch.

Range Vent Hood Repair Help - Free troubleshooting

Some units have a reset button on the unit some place Check and see if you have one and push to reset. Hope this works for you.

Get a new bulb and look at it, that will help as not all bulbs have the same base.

Sounds like you may need to replace the fan switch. The fact that it wont turn off and that it only works on low speed supports that switch is broken.

When faced with the total unavailability of replacement parts, its time to get creative, and make your own diffuser cover. Flat ones
can be easily made - find anything plastic that's semi-translucent (like a plastic milk bottle), and cut it with a utility knife.
I have also used a utility knife to cut a polystyrene diffuser cover
originally intended for a 2-ft x 4-ft suspended ceiling fluorescent light fixture.
In case the diffuser cover you make wants to burn when placed close to a light bulb, replace the bulb with a CFL (compact fluorescent) bulb, which run MUCH cooler than incandescent light bulbs.
Old lampshades can be cut and used, but may need to be ironed flat. The major advantage of lampshade material is that
it can be folded over at the edge once or twice, which will fill space - and possibly hold the cover where a plastic sheet might be too loose.
You'll know that your efforts have met with success when you can easily remove your ne diffuser cover to replace the light bulb.

Need plastic cover on Venmar vent Hood, which measures 3 1/2 inches by 18 inches with 2 tabs.

Try universal Appliance parts store..google it for a location in your area...

The electronic controller is faulty. You will have to contact the supplier where you purchased the rangehood from to find out who the warranty agents are for that make & model.