United Stationers Recent Questions, Troubleshooting Help & Support

I do not know for sure but it sounds like the paper is not griped properly, this would cause the jagged lines. I would try another ink cart when the loose paper problem is resolved. I hope this helps.

I would suspect that the you didn't get the drum back in properly. There are contacts on the drum casing that need to make contact with the base of the printer. It's possible that either it's not seated properly or that some toner is lodged over the contact preventing a good electrical connection. Try removing the drum again and carefully reinsert.

Fixing Carriage Jam HP Officejet J6400 All in One Printer

i love google.... usually: http://h30434.www3.hp.com/t5/Other-Printing-Questions/Photosmart-C8180-Ink-System-Failure-Error-0xc-18a0005/td-p/331285 If you need further help, I’m available over the phone at https://www.6ya.com/expert/robert_beef7390c57fac0d

Unplug the phone calde from the fax machine and plug it in to phone. Do dial tone, is the other end connected to the outlet in the wall? Do you have a phone line to use as a fax line?

It would probably be time for a new hard drive. You can try putting it in a plastic back and them put it in the freezer for an hour. Sometimes this gives you enough time to pull the data off. A drive recovery service would be the other option if the information on the drive is very important to you (Ontrack.com or Driversavers.com)

I always use HP printers and every time i get a new operating system (vista, win7 etc) the HP software does not fully install. I go to HP.com to install the latest software for the appropriate OS but rarely get more than just the printer working. If i require the scanner or cd print features i have to do that from an older computer or older operating system that the printer was originally installed on.

You should have an icon on your desktop called "HP Solution Center." Click on the icon, and look for "Printer Toolbox." Open the toolbox, and there should be a button which will print an alignment page.If not, then click open your Start Menu, click on All Programs, scroll down to HP.... and look for Printer Toolbox. and proceed as above. If none of this works, go to : www.HP.com click on Support for your device (model name and number) and you should be able to get an answer there... Good Luck.Joel Bergmann[email protected]

Try cleaning the roller in the top of the doc feeder with windex and then try to feed another copy.