Uniden Lands Phones - Page 5 - Recent Questions, Troubleshooting & Support

open line if have more than one phone plugged into a jack unplug one at a time and check dial tone if no change have phone company check incoming line

To turn off silent mode, press the "#" and hold down until it changes. :)

https://www.manualslib.com/products/Uniden-Dss-2455-2120056.html https://uniden.com.au/wp-content/uploads/DSS-2455.pdf https://www.manualslib.com/manual/184594/Uniden-Dss-2455.html

Here are a couple of sites that may have what you are looking for. https://www.google.com/search?q=manualslib&rlz=1C1AFAB_enUS452US453&oq=&sourceid=chrome&ie=UTF-8 Free User Manuals and Owners Guides ManualsOnline com

press menu down to answer set up keep pressing the down button until you get vmwi press menu change to yes press menu then end

Answer

How to stop the visual ringer blinking

That might be the Voice Mail Warning Indicator. On the D3098 and similar handsets, it is reset by: 1. press [menu] 2. scroll down to "Global Setup", press [select] 3. scroll down to "VMWI Reset", press [select] 4. scroll down from "No" to "Yes", press [select] 5. handset will chirp, blinking lamp goes out, 6. press [END] Other models, check your manual. The model number is on a small sticker under the battery in the handset -- enter this number at www.manualslib.com to get a free copy of the User's Manual.

My phone won't charge on the base unit. It does charge on the other smaller base.

To adjust the ringer volume:

1. With the phone in standby, press ^ or v. The display shows the current volume level and the handset sounds the ringer at that level.
2. Use ^ to make the ringer volume louder or use v to make it softer or turn it off completely.
3. When you hear the ringer volume level you want to use, stop pressing keys. The handset will use the new ringer volume starting with the next incoming call.

Note: If you set the ringer volume to Off, the handset won't ring. If you have any accessory handsets, other handsets will ring according to their individual settings.

To adjust the earpiece volume:

You can choose from six volume levels for the handset earpiece. To adjust the earpiece volume while on a call, press ^ to make it louder or v to make it softer. The handset display shows the current volume level for the earpiece.

To adjust the speaker volume:

You can choose from six volume levels for the handset speaker while on a speakerphone call. To adjust the handset speaker volume, press ^ to make it louder or v to make it softer. The handset display shows the current volume level for the handset speaker.

Note: The handset earpiece and the handset speaker have separate volume settings.

No, the Uniden D1780-2W handset is not compatible with the EZAI2997 base. The EZAI2997 base is compatible with up to 6 EZX290 handsets. Amazon lists some used models for sale: https://www.amazon.com/Uniden-Accessory-Handset-Charger-EZX290/dp/B0026LLBG8 . The D1780-2W handset came with the D1780-2 or other models with the D1780 or D1780-BT base. Uniden has the manuals for these systems on their support site. The current link to the EZAI2997 manual is http://www.uniden.info/download/ompdf/EZAI2997om.pdf . The D1780 support page is http://www.uniden.info/download/index.cfm?s=D1780 . The manual for this system is currently http://www.uniden.info/download/ompdf/D1780om.pdf . I hope this helps. Cindy Wells

Phone's "Status Light" Not Illuminating or Battery Failing to Charge

1.Check that the base unit's AC adapter is plugged into the both the base unit and electrical outlet firmly.

2.Wipe the base unit's handset holder's connectors and the connectors on the bottom of the handset with a soft cloth/rag or pencil eraser to remove any loose dust and dirt from the metal connectors.

3.Place the handset firmly in the base unit holder until the "Status Light" illuminates, indicating the battery is charging.
4.Replace your Uniden cordless phone's battery, by purchasing a compatible battery from an electronic supply store or directly from Uniden. Turn your phone's handset unit over and remove its battery door. Lift the phone's battery pack up and gently unplug the battery's wire connector by pressing in on the connector's side and pulling the connector free from the phone's circuit board. Battery installation is the reverse of removal.

Read more: Troubleshooting a Uniden Cordless Phone ' eHow.com http://www.ehow.com/how_7252483_troubleshooting-uniden-cordless-phone.html#ixzz1Wkmk0pxX

Is it in 'tone' mode or "pulse" mode

I find no way to disable the CID record feature. If you wish to neither see nor record CID, contact your service provide and unsubscribe to the CID service. A copy of the user manual is available at; http://www.uniden.info/download/ompdf/DECT1580om.pdf To delete all the recorded Caller ID numbers with the handset do the following; When the phone is in standby, press ID (on the 4-way navigation function key), then press MENU/SELECT, then select Delete All. When the phone asks you to confirm, select Yes.

http://www.fixya.com/support/t1576275-uniden_phone_says_line_hold_50_time http://www.fixya.com/support/t1576275-uniden_phone_says_line_hold_50_time

Likely the two ring answer is "toll saver" You'll need to retrieve new messages. Once all new messages have been reviewed, it should return to the programmed number of rings, see "ring time" in the manual. ALL messages may be deleted as follows; delete all messages With the phone in standby, press Delete; press Delete again to confirm. If answering system messages have been retrieved, a continuing flashing indicator could be your voice mail service; Voice Message Notification • If you subscribe to a voice mail service, your phone can notify you when you have a new message. This feature supports Frequency-Shift Keying (FSK) notification. Contact your voice mail provider for information. • When you have new messages, the display shows a message icon. After you listen to your messages, the message icon turns off. If it doesn't, you can reset it. With the phone in standby, open the menu and select Global Setup; select VMWI Reset, then select Yes A copy of the manual is available from Uniden; A copy of your manual can be downloaded free of charge from; http://www.uniden.info/download/ompdf/D1788om.pdf

Suggest you reset handset and register again with base. Instructions from manual... Resetting Handsets If you have trouble with a handset or if you want to replace one, clear the registration information from the base and the handset: 1. Press & hold END and # at the same time until you see the System Reset menu. 2.If you still have the base the handset is registered to, select Deregister HS, then select the handset you want to reset. If you don't have that base anymore, select Base Unavailable. 3. To confirm, select Yes. The handset displays Handset not registered. Registering Handsets If you see a "not registered" message on a handset, you must register it to a base before using it. 1. Place the handset in the base; the display should say Handset Registering. 2.Wait until the display says Registration Complete (about 30 seconds), then pick up the handset and press TALK/FLASH. 3.If you don't hear a dial tone or the display says Registration Failed, charge the battery completely, then try again.