Uniden Lands Phones - Page 2 - Recent Questions, Troubleshooting & Support
How to register a new handset?
Unfortunately, the EXI5560 is not an expandable cordless telephone system. The base can only use the handset to which it was originally linked at the factory.
Similarly, the DXA15588 handsets need to be paired to that base, not just to any Uniden cordless phone base. The first handset gets registered while it is charging in the main base. Charge the second handset fully in the charging base. Make sure not to use the phone for any incoming calls during the registration process. Take the first handset off the main base. You do not have to put this handset on the other charger and put second handset on the main base. Wait for the Charge/In Use LED to begin to flash. Wait at least another 5 seconds before removing the second handset from the main base. That's when you should be able to use the find HS button on the DXA15588-2 main base to get both handsets to beep.
I hope this helps. You can find the manuals for these phones at the following sites: https://www.uniden.info/download/ompdf/EXI5560om.pdf and https://www.uniden.info/download/ompdf/DXAI5588-2om.pdf .
Cindy Wells
Need to reset Uniden base
HOLA tengo un problema con mi base tiene un error el n?mero 4 no se d?nde o c?mo solucionar el peo la E4 no enciende eso paso desde un corte el?ctrico si alguien me puede ayudarme
Panasonic cordless handsets all say line in use
I had the same problem. Something makes the phone's memory get "stuck." Take the battery out of the phone for a minute and then put it back. Then unplug the phone and plug in again. You need to do this with all extensions. The problem goes away.
I have a uniden dect
Since you declined to specify the model of your Uniden DECT 6.0 phone, please select it from the list beginning at
http://www.uniden.com/owners-manuals/dect-phones/scat/dectphones_mnl/
to download a manual.
Uniden xdect 8055 pairing phones
Xdect 8055 handset reset
1) Press and hold the hang up and # keys for at least 5 seconds.
2) Move the cursor to select Base Unavailable and then press Select.
3) Select the base you want to deregister from, press Select and then move the cursor to Yes and select.
This causes the phone to delete any of its base information.
How to set the correct time on my uniden model cez260 corded phone?
Like many phones, it sets the time upon receiving a call, and there is no other way to set the time. Until you receive the first call, the time will show incorrectly. (Also, the phone will not show the change to or from daylight saving time until it receives a call after the change.)
Not finding what you are looking for?