Uniden Logo

Uniden Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 2K Products
  • 77K Answers
  • 2M Views

Press scan then press key pad numbers to enable banks. All of your programmed frequencies may have been erased.

Uniden Radio... | Answered Yesterday


UNMUTE PERHAPS OR WITH HANDSET IN SETUP

Uniden Lands... | Answered on Apr 12, 2019


The directions to set the date and time on the Uniden EXS9500 are shown in the manual starting on page 21. Press and hold the Clock button (the second button from the left below the answering system buttons) on the base until you hear a beep. Use the Skip/Repeat buttons (the two end buttons of the answering system buttons) to select the current day of the week. The LCD with show 0 through 6 and the voice prompt will list the day of the week. Press Clock when the correct day of the week is announced. Use the Skip/Repeat buttons to select the current hour (1-12). Press Clock to set the hour. Use the Skip/Repeat buttons to select the current minutes and press Clock to save the setting. Use the Skip/Repeat buttons to select AM/PM and press Clock to save the current time and exit the clock setting menu.

ManualsLib has the directions starting here: https://www.manualslib.com/manual/334436/Uniden-Exs9500.html?page=21#manual .

I hope this helps.

Cindy Wells

Uniden Lands... | Answered on Apr 12, 2019


Your manual is accessed from here. It is usually fairly complicated from options on the handset.



Owner Manuals

Uniden DECT 6.0... | Answered on Apr 11, 2019


Contact Uniden directly and request the schematic diagram(s).

Uniden Lands... | Answered on Apr 08, 2019


An older uniden for a frequency range between 100 and 199 mhz may expect you to interpret the frequency being shown as 1 followed by other digits on your display. For example a frequency of 145.350 may expect you to mentally add the printed "1" and digits 45350 giving the total frequency. This saved the manufacturer from having to purchase another digit to display the frequency since it is always 1 to start with.

Uniden Radio... | Answered on Apr 08, 2019


It is the indicator that you have a voice mail (answering service that comes with your phone provider. Contact them to tell you how to access it.
to access iprimus voice mail, dial your own number it will then ask for your PIN, if you have not set this up the default number is your area code ie. 02 Sydney 03 Melbourne etc. and the last 2 numbers of your phone number

Uniden Lands... | Answered on Apr 07, 2019


I CALLED UNIDEN WITH THE SAME PROBLEM.

THE VISUAL RINGER IS FLASHING WHEN YOU HAVE OLD EMAILS. YOU HAVE TO DELETE THE OLD EMAILS

Uniden Cordless... | Answered on Apr 07, 2019


open line if have more than one phone plugged into a jack unplug one at a time and check dial tone if no change have phone company check incoming line

Uniden Lands... | Answered on Apr 07, 2019


To turn off silent mode, press the "#" and hold down until it changes. :)

Uniden DECT... | Answered on Apr 02, 2019


search ebay for "regency r1070 scanner antenna" and many will pop up. Also Radio shack..

Uniden Radio... | Answered on Mar 28, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Uniden Experts

Cindy Wells

Level 3 Expert

5840 Answers

Marvin
Marvin

Level 3 Expert

84565 Answers

The Knight
The Knight

Level 3 Expert

76036 Answers

Are you an Uniden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...