My television keeps lagging, can you help?
You may be able to improve the performance by any or all of the following measures:
1. Remove some of the apps. Yes, the abundance of channel apps may weight down performance.
2. Disable automatic software updates.
3. If audio is lagging, switch audio to Movie or Live.
4. Reset your Wi-Fi router.
5. Switch the TV to Game Mode and see if performance is smoother.
6. If it has a HDMI port, connect a Roku device to it. My Vizio Smartcast lagged and I was astonished how much my Roku device was more responsive than Smartcast.
Hopefully, one of these will improve your viewing.
Oil line routing for a 1992 HD ultra classic electra glide
The oil line routing for a 1992 Harley-Davidson Ultra Classic Electra Glide can vary depending on the specific configuration and any modifications that have been made to the motorcycle. However, I can provide you with a general guideline for the oil line routing on this model:
- Oil Pump to Oil Filter: There should be a hose connecting the oil pump to the oil filter. The oil pump is typically located on the bottom of the engine, while the oil filter is usually located on the front or side of the engine.
- Oil Filter to Engine: Another hose should connect the oil filter to the engine. This hose delivers the filtered oil from the oil filter back into the engine.
- Oil Tank to Oil Pump: The oil tank, which is usually located underneath the seat or in the saddlebags, should have a hose that connects to the oil pump. This hose allows the oil to be drawn from the oil tank into the oil pump for circulation.
- Breather Lines: There may also be breather lines connected to the engine and oil tank. These lines help to release excess pressure and prevent oil leaks.
It is important to consult the motorcycle's service manual or seek assistance from a qualified mechanic to ensure the correct routing of oil lines for your specific model. The service manual will provide detailed diagrams and instructions specific to your motorcycle's year and model, ensuring proper oil flow and system functionality.
Additionally, be sure to check for any specific oil line routing guidelines or modifications from aftermarket parts or accessories that may have been installed on your motorcycle.
6/18/2023 3:02:49 AM •
Ultra...
•
Answered
on Jun 18, 2023
Onida ultra slim tv hoyel mode off kese karen
To turn off the hotel mode on an Onida Ultra Slim TV, you need to follow these steps:
- Turn on the TV and press the "Menu" button on the remote control.
- Use the navigation buttons to select the "Setup" option and press the "OK" button.
- Navigate to the "Installation" option and select it.
- Select the "Hotel Mode" option and change the setting to "Off".
- Use the remote control to enter the password. The default password is usually "0000" or "1234". If these do not work, please refer to the manual for your TV model for the correct password.
- Once the correct password is entered, the hotel mode will be turned off.
- Save the changes and exit the menu by pressing the "Menu" button.
After completing these steps, the hotel mode should be turned off and you should be able to use all the features of the TV as normal. If you encounter any issues or if the steps do not work for your TV model, please refer to the manual or contact Onida customer support for assistance.
The menu on my TCL 43P615K 43 Smart 4K Ultra HD will not allow me to scroll. I have done factory reset, but no help
If you're unable to scroll through the menu on your TCL 43P615K 43 Smart 4K Ultra HD, there are a few things you can try to resolve the issue:
- Check the remote: Make sure that the batteries in your remote are fresh and that you are pointing it directly at the TV. Also make sure that the remote is not malfunctioning or damaged.
- Check the settings: Go to the menu settings and make sure that the menu navigation options are set to "normal" and not "quick" or "simple" mode.
- Try a different input: Try switching the input on your TV to a different source, such as an HDMI or USB input, and then switch back to the original input. This can sometimes reset the menu navigation.
- Check for software updates: Go to the settings menu and check for software updates. If an update is available, install it and see if that resolves the issue.
- Check the TV's buttons: Try to navigate the menu using the buttons on the TV instead of the remote.
- Unplug the TV: Unplug the TV from the power source for a few minutes and then plug it back in. This can help reset the TV and resolve any glitches that may be causing the problem.
If you've tried all of these steps and you still cannot scroll through the menu, it's possible that there is a hardware issue with the TV. In this case, you may need to contact TCL support for further assistance.
https://amzn.to/3ZBjjmi
75in tv bolva volume button stuck
DOES SCREEN WORK VIDEO OK,. ?
DOES SOUND WORK AT ALL EVEN IF WEAK.? OR TOO LOUD.
VOLUME ON THE REMOTE CLICKER FAILS.
PUT ONLY FRESH BATTERIES IN THE REMOte. fresh !
THIS TV IS CHEAP BRAND./
is it new TV if yes take it back for warranty, or exchange.
amazon reviews are HORRID, for this maker, why pick them
and not LG or Samsung brands vastly better quality
1 star 25% unhappy users;
huge reports 1 month or 1 year and is dead. or dim forever.
TCL 43P610K 43" Smart 4K Ultra HD TV
Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
https://elektrotricks.blogspot.com/
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty.
Counting of number of blinks to Philips TVs is entirely different to that of other brand TVs. It is not a direct count procedure. The site have details about how to count the number of LED blinks [Fault Codes] to Philips brand TVs are given; along with details of the faulty circuit location.
Did you ever used any tool of ultra wide SCSI? I want to know some distinct quality of that? My desktop is not responding meanwhile.
Larry the Computer Guy, posted up there ^^^^ instead of here.
- Larry Ng Jan 19, 2021NO PC told no maker no model
no UW SCSI card told, at all. (Adaptec?)_
SCSI can run HDD, or tape and many things
what does yours run? IDK.
we run ultra for years, back when.
why are you doing old UW SCSI.?
tell what tool means,. ive no idea at all
a metal tool , software what?
tell what the tool does? and we now can communicate.
only very very old full blown workstations
had a UW SCsi HDD, non told yet.
what does not responding mean./
1: PC dead silent..
2: all fans dead.
3: power on LED dead or acts odd now.?
4; BIOS screens dead./ all ? this is goal #1
5: hdd boot files not found error on screen.
6: any beep codes, any LED blink codes.
id have to ask like 100 question more
with you not telling make of PC , model of PC and where is this SCSI port, show 1 photo of
the inside of PC left side and AHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
-
Anonymous Jan 19, 2021
pure raw wild guess.
the PC is 20 year old
the HDD died 15 years ago
and found this rig for $1 at a garage sale
DOA.
Ultra-320 SCSI ? from year 2003?
remove it and put in SSD 2.5" solid state drive (SATA) and boot from that.
end story, join the modern world?
SCSI is now dead, tech. as in fully retired.
we use SAS or fast SSD. now.
-
Larry Ng Jan 19, 2021
if the HDD is dead say so.
post symptoms and ask for help,ok?
that is why this forum exists to diagnose problems.
test #1 on PC that seems to have power and does with BIOS screens working
the HDD must be heard to spin. (and all fans)
ask how. (i own a 5$ stethoscope a TOOL)
no spin ,no joy, possible.
it has motor inside, the hdd controller
sends a command to the hDD to spin up
turned on, in magical SCSI land
we can even sequence say 5 HDD drives to spin up 1 at a time to not overload the PSu.
that is all controlled via the SCSI card
own Bios screens. prompted at power on in fact.
the SCSI card has its own menus inside its own ROM.firmware. we go there and check the drive out. (might show HDD dead in fact)
NO PC told no scsi card told.
here is mine spinning up now.https://pcdied.com/HDD-SDD/spoolupjet.mp...
if HDD click like mad , the HDD is bad.
like this.
https://pcdied.com/HDD-SDD/WD-bad-heads-...*****.mp3
post of photo or left side inside this PC.
lid off PC pulled off. (then add a photo)
then we can talk turkey. (to brass tacks)
-
Anonymous Jan 19, 2021
have scsi now
or dreaming of 2003 old dead parts to buy cheap. tell the story fully dude. we can not guess what is up there.
did i nail this?
-
Anonymous Jan 19, 2021
post a problem, and ask for help
please.
what PC
what OS
and what fails. tell all that.
even tell what works good too?
-
Anonymous Jan 19, 2021
the reason nobody talks SCSI now is that it is now retired. (eol)
yes some very very old PCs workstations had this, OOBE day1. sure. have one in my attic full of thick dust. old and slow.
and for sure servers. old.
Not finding what you are looking for?