Trendnet TEW - Recent Questions, Troubleshooting & Support

Have you checked for new drivers?

Take a look at the online manual:www.trendnet.com/download_manager/default.asp?iFile=12474 under the password section (step 5). Try enabling a password under WPA and enter it on your iphone.

go to wireless network properties and set the network authentication to shared key. then supply the network key you like. email me so i can help you if cant find it. [email protected]. i am more than willing to help you

READ AT http://www.linux-drivers.org/

You directed this question at me, but unfortunately I'm unable to provide you with a real solution at this time.FixYa has discontinued direct questions, so if you would care to repost your question, the repost will be visible to all members of the FixYa community. Hopefully one of them will be able to provide you with a real solution. Thank you for using FixYa.

What is your OS?

GO http://www.trendnet.com/downloads/list_subcategory.asp?SUBTYPE_ID=1310

1)Open NETWORK CONNECTIONS from CONTROL PANEL
2)Right click on the connection and select PROPERTIES.
3)There should be a tab for WIRELESS NETWORKS.
4)Find your network by name near the bottom and click REMOVE.
5)Click ADD then you will need to enter your network information manually in the window that pops up. You will need to uncheck the box that says "My key is provided automatically"

SSID is the network name.
NETWORK KEY - This is the important one. get it wrong and click OK and when you go back in to modify it Windows screws up and saves it wrong. You can enter network keys in ASCII (typed letters) or the HEX that the router converts the key into. 5 ASCII/10 Hex is for 64 bit, 13 ASCII / 26 HEX is for 128 bit. Your key must be one of these 2 lengths.

Try removing the USB stick and then power cycle the PC with it plugged in i.e. before it reboots. This way the driver will verify the device etc.

hi, i could try to explain, but it would take pages, so try following the steps on (http://www.microsoft.com/athome/organization/wirelesssetup.aspx).

yes, the g based adapter is only compatible with G networks not N. You can fix your problem by logging into your router and changing the advanced setup options so they accept the G Based adapter.