Tissot T - Recent Questions, Troubleshooting & Support - Page 4
TIME IS NOT THE SAME AS THE DIGITAL TIME
- Push the middle (T) button.
- Touch the screen in the center selecting the units mode (24 C m).
- Push the middle (T) button again for 5
seconds.
- "SYNCHro" will appear on the display.
- Use (+) button for min arm and (-) for hour arm.
- Bring the two hands pre-cisely to 12 o'clock.
- Press the middle (T) button to validate the setting.
7/9/2013 10:18:39 AM •
Tissot...
•
Answered
on Jul 09, 2013
The minute on T1 is one minute faster than on T2
hello,kindly pull out the crown at the middle of the crowns beside the tissot watch to set the time zone of the T2..you can kindly follow the instruction provided below in the site.
http://www.tissot.ch/virtualdata/usersmanual/123-en.pdf
www.tissot.ch/virtualdata/usersmanual/123-en.pdf
www.tissot.ch/data/usersmanual/142-en.pdf
wish you good luck,
take care.
Buzz sound the stuck
The Problem of this error is the battery level is down and the cant work all this functions.Please Keep the watch only for time until you change the battery
My Tissot T-Touch Altimeter does not function.
Mine did the same thing; I read in other blogs that this could happen due to humidity. I heat up my watch with my wife's blower for about 5 minutes on high. After 5 min I couldn't even touch it! The screen went blank. After a few minutes when it cooled down the screen came back up and to my amazement all the function came back. it is risky but So far... it works well.
Showing 6ae on my Tissot T touch. Also cannot
Press the center button marked "T". The watch should beep once;- Touch the center of the touch-sensitive face until 24H Cm appears in the digital LCD display;
- Press and hold the center button marked "T" for approx. 5 seconds. The watch will beep once and then again a second time, after 5 seconds have passed. The digital LCD display should now read SYNCHRO;
- Press the upper button marked "+" to move the minute hand until it is positioned exactly at 12:00;
- Press the lower button marked "-" to move the hour hand until it is also positioned exactly at 12:00;
- When both hands are aligned together and pointing directly at 12:00, press the center button marked "T" to save your settings.
- Your watch is now synchronized, so no expensive repair work is required!
Need to replace battery on
This can be difficult(read dangerous to your watches health) to do if you don't know how. I paid 700 for mine and would not try to save 10 bucks doing it myself versus destroying my own watch, take it to a legitemate watchmaker. He will also inspect gaskets and will have the proper tools and most importantly will know what he is doing.
My T touch is not responding
Even I see the same. But I got this repeatedly to the Authorised Service Personnel of TIssot in India. But this never got fixed. Anyways thanks for the guidance. CheersMadhu
Analogue hands don't correspode to digital clock
Hi,
Sometimes a watch will be off center due to shock, dead battery etc. Symptoms are; hands don’t line up, digital and analog time doesn’t match, Compass function doesn’t have the hands exactly opposite etc. This can all be fixed. The Synchronization function can be used:
1. Activate Crystal
2. Tap center until you are the unit’s screen (12h or 24h, F ft or C m).
3. Push and hold (at least five seconds) the center crown
4. Watch will beep and word (SYNCHRO) will appear in the display.
5. Use the top + button to line up the minute hand right on the 12.
6. Use the bottom – button to line up the hour hand right on the 12.
7. When finished, press crown and you will go back to time.
The tissot visodate watch is automatic not battery driven.
I would not wind the watch manually. I also have a Tissot. If you cannot wear it often enough to keep it going, you can purchase a watch box that is made for self-winding watches which will turn the watch periodically in order to keep it wound.
Not finding what you are looking for?
