Timex Expedition - Answered Questions & Fixed Issues

I am looking for stem and crown for Timex Expedition North Tide Temp Compass watch. Mine broken.

old battery perhaps?

To replace the battery in a Rosendahl watch with the model number 43250, you will need to follow these steps:

1. Remove the back of the watch by using a watch back removal tool or a small flathead screwdriver to gently pry it off.
2. Take out the old battery and discard it properly.
3. Take the new battery and orient it so that the positive side is facing up.
4. Place the new battery in the watch, making sure that it is positioned correctly and securely.
5. Replace the back of the watch by pressing it back into place. Make sure that it is securely fastened.

It is important to handle the battery with care, as they can be damaged if they are dropped or handled roughly. If you are uncertain about replacing the battery yourself, you can have it done by a professional watch repair technician. They will be able to replace the battery safely and ensure that the watch is in good working order

To set the time and date on your Timex Indiglo watch with a CR2016 battery, follow these steps:

1. Press and hold the stem (the button on the side of the watch) until the display begins to flash.
2. Use the stem to cycle through the different settings: time, day, date, and year.
3. When you reach the setting you want to change, use the stem to adjust the value.
4. Once you have set the time, day, date, and year to the correct values, press the stem to exit the setting mode.

If you have trouble setting the time and date on your watch, you may want to consult the manual that came with the watch for more detailed instructions. If you do not have the manual, you may be able to find a copy online or you can try contacting Timex customer service for assistance.

The case sleeve gasket on the Timex WR50M watches should measure 16.5mm in diameter.

Try using a different watch battery.

Cua hang dongho Galle Watch chuyen phan phoi cac hang dongho deo tay nam va nu nhap khau tu thuy sy va nhat ban...,Cua hang Galle Watch chuyen buon ban cac loai dongho deo tay chinh hanghttps://galle.vn

Low battery can cause this type of fault! Make sure after changing the battery to do the all reset inside of the watch. If this does not work get in contact with Timex for how to have their watch sent for service.

i would advise you to contact timex customer services .

New batterys can go bad, that is why they have a warranty. Replace the battery

There is no separate battery for the indiglo,maybe indiglo circuit is lose or defected already,just open the watch and check for lose connection.If happen the circuit is tight and still not working then replace the indiglo circuit.

Hope it may helps you;

Regards
VOTIT

Did not fix my timed WS4..

Janice, set vibration alarm to on expedition watch. Check the attached links,instruction and guides, Good luck "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info." How to Enable Vibration Mode for Alarms on Timex Expedition W214 Wristwatch https://answers.yahoo.com/question/index?qid=20111002092048AADRLYs http://www.timex.com/info/watch-manuals

click the link below for timex manuals http://assets.timex.com/manuals/

Replace the back cover with the arrow pointing directly at the stem. Everything should work correctly with the cover in that position.

it can only be turn counter clockwise, if it doesn't move, bring it to watch service center. i hope i had been helped you.

There is a process to make an all reset. After the reset try again. The user user manual can be downloaded from Timex. Make very sure the watch is absolutely flat and far from metal objects. Even being near most furniture can effect the reading because they can have metal springs. Many homes have a lot of metal in their construction. It's best to calibrate the compass out doors away from power wires or cars or anything metal. On the street you can have metal under the pavement.

If this does not work call Timex. There have been instances where the compass module or sensor had to be changed. I have the same watch. It's a very good one.

Thank you for the member's advise that...Replace the back cover with the arrow on the back point directly at the stem. The Indiglo backlight, Alarms and Chimes should all work when all the back cover is in the correct position. If it's at the wrong position of cover it'll not work correctly because the speaker or buzzer of your watch must be attached on the correct case back. Just try to fix it right!

Yesterday, I have just replaced new battery of CR 1620 but it gets no sound as you. I found that it must be resetted that I don't know how. I'm trying to find it out.

Proabably it is "stuck". I often find that a sharp flick or two with my finger on the face of the watch will cause it to start running. Should not need "resetting".