What can I do to finalize my CD.
First is the camera set to Record mode? What's the battery level on the video camera? The VP-DX100H won't finalize a disc if the battery is low. How much video has been recorded? All discs need space (a few hundred MB) to add data when they are finalized. The manual for this camera is available here:
https://www.samsung.com/uk/support/model/VP-DX100H/XEF/ . See page 47 of the manual for the instructions on finalizing the disc. Finally how often has the re-writable media been used before?
You can't finalize a disc in a different machine; this is true for cameras and VHS/DVD recorders. (Some computers may not have an issue with DVDs made on different machines with the compatible OS versions. IE: some versions of Windows.) If your computer has a DVD writer and an appropriate video capture card, you could use software to capture the video using the cables and setting the camera to AV Out. Then burn the video/images to a disc. Note: some older/cheap computers have CD burners with a DVD player. They don't handle DVDs that weren't finalized.
I hope this helps. I know some DVD video recorders will be finicky with certain brands of media. I don't see anything like that in the documentation from Samsung. You might check if there is a FAQ about brands of DVD+RW for the camera.
Cindy Wells
(I use mostly write once media. Back in the days of cassette tape storage, I found they didn't really survive extra write cycles.)
How do you separate a drive adapter and disc adapter that are stuck together on KitchenAid KFP1466ER ?
'make model (what it is)' as first 3 words, a clear question and that great picture would have been useful.
This is the best way, and a second and third way below.
Spray WD40 into those slots. Have someone hold that ring over the edge of a worktop. Hold that lip on the left edge lip of the left piece with a pair of slip joint pliers, then tap the slip joint pliers with a small hammer to tap the two pieces apart. Then wash in soapy water to wash off the WD40.
I was somewhat reluctant to post this last night, but here goes.
Your thigh muscles are the strongest in your body. Put rubber washing up gloves on for grip. Sitting in a dining chair, knees together, grip both parts, press down on your thighs with your fists just before your knees and push your legs apart.
Final way. Get some Paracord. Put a 6 foot length on one end with a constrictor knot, and tie it to an immovable object like a tree. Put another 6 foot and a constrictor knot on the other end, and tie it to the back of your car. Drive slowly forward.
Or just ask a man :>D
..
My register is only printing on half paper
Assuming you have the correct thermal paper in the register, here is something to try:
The SPS-320 has an electronic journal that can be printed to memory rather than live on paper.
To print the journal entries, follow these steps:
Turn off the register.
Hold down the "Journal" button (usually located on the keyboard).
While holding the button, turn the register back on.
Release the button. The journal entries should now print.
Check for Errors:
Review the register's display for any error messages or codes.
If there are error messages, consult the user manual or seek professional assistance.
Contact Support:
If the issue persists, consider reaching out to Sam4S customer support .
How do I fix my maxwest astro 8R tablet black screen and won't turn on
If your Maxwest Astro 8R tablet is showing a black screen and won't turn on, you can try the following troubleshooting steps:
- Charge the tablet: Plug your tablet into a wall charger with the original charging cable and allow it to charge for at least 30 minutes. Sometimes, the device may have a drained battery, preventing it from turning on.
- Force reboot: If the tablet is still unresponsive after charging, try performing a force reboot. Look for a small reset hole on the side or back of the tablet and insert a paperclip or a similar thin object into the hole. Press and hold the reset button for about 10-15 seconds, then release it. Now try turning on the tablet again.
- Check the power button: Ensure that the power button is not stuck or damaged. Press and release the power button a few times to see if it responds. If the button is indeed faulty, you may need to get it repaired.
- Factory reset: If none of the above steps work, you can try performing a factory reset. Note that this will erase all your data, so it should be done as a last resort. Look for a combination of buttons to press and hold (e.g., power button + volume up or down) to enter the recovery mode. Once in recovery mode, use the volume buttons to navigate and the power button to select the option to factory reset or wipe data/factory reset. Confirm the action and let the tablet reset. Afterward, try turning it on again.
- Professional repair: If none of the above steps solve the issue, it's possible that there is an internal hardware problem. In this case, it's recommended to take the tablet to a professional technician or contact the manufacturer's support for further assistance.
Remember to check if your tablet is still under warranty before attempting any repairs.
Not finding what you are looking for?
