Kitchen Appliances - Others - Answered Questions & Fixed Issues

It is a commercial machine and computerized, better to have it serviced professionally. https://www.google.com/search?q=Bizerba+A404FB+slice+button+turn+red ..

All questions need 'make model (what is is)' as first 3 words. This sounds like a bread maker? I bake bread every 2 weeks, but using traditional methods. Mix ingredients to shaggy dough, leave to Autolyse for 30 minutes. Knead for 10 minutes. Prove 1 hour. Knead 10 minutes. Form and Prove for 1 hour. Bake 35 minutes. For your machine, Google make model manual Most are online, or click Comment under my answer and I will try and find it. ..

You are the only person to report this fault. It is supposed to beep when it starts working. https://www.google.com/search?q=LEM+5+tray+dehydrator+1152+beeps Contact their Support Number https://images.thdstatic.com/catalog/pdfimages/92/92177c9a-7d47-430f-ad81-56db7edbd68d.pdf Lem 1152. The warranty period is 2 years but has to have been registered. . https://www.lemproducts.com/product/mighty-bite-5-tray-countertop-dehydrator/kitchen-food-dehydrators ..

Just spam SOLVED and VANISH. We have no readership in UAE as we are a North American site..

Anets B8043803-C Gas Conversion Kit, Propane to Natural Gas, SLG40 $ 569.00

• Part #: B8043803-C

In Stock, ships today https://www.middlebyadvantage.com/anets/conversion-kits/parts ..

All will be found in your user manual or onlune on their web site. Similar to all other bread making machines. 600g Strong flour, 2Tbs fast acting yeast, 435ml wearm water, pinch of salt, 20g butter and 1tsp sugar. Use 450ml water for wholemeal.

Question edited for clarity, add maker. Most parts are discontinued and I can't find a parts diagram. This article is the most helpful one. It sounds like you need a new paddle so it fits the shaft better, or you have too many nylon washers and the shaft isn't sitting deep enough in the paddle. All my bread is made by hand, no machines and hand kneaded. The dough proves in the oven with just the light on. Breadmaking is fun.

Black and Decker B2200 Breadmaker Repair

iFixit https://www.ifixit.com > ... > Appliance > Device The Black and Decker B2200 is a breadmaker produced by Black and Decker, an American manufacturer of power tools, accessories, hardware, home improvement. https://www.google.com/search?q=black+and+decker+b2200+bread+maker+parts ..

https://www.manualslib.com/manual/2580199/Kitchenpro-Prima.html Possibly this is the manual for your machine.

Yes, you can heat the plates in the oven to melt any buildup. Make sure that the temperature remains low throughout the process, and that you keep an eye on the plates in case they become too hot. I suggest setting your oven temperature to around 300°F and leaving them for no more than 10 minutes at a time. In addition, you can brush a thin layer of oil onto the plates every one or two uses.

It is possible that the Vitaclay is not heating properly and is unable to reach the required temperature to cook the rice. To fix this issue, check if there is any visible damage to the unit such as cracks, warps, or any other damage. If any damage is visible, the heating element may need to be replaced. If there is no visible damage, check the internal electrical connections and replace any bad components in order to restore heating ability. If these steps do not help, contact customer support for further assistance.

The F27 code indicates a control board issue which requires professional service. We recommend that you contact a Frigidaire Professional authorized service provider for assistance in resolving the issue with your appliance.

Rubber feet pads in the ART712SB model can be purchased online from retailers such as Amazon, eBay, and AliExpress. They can also be purchased from hardware stores such as Home Depot, Lowes, and Ace Hardware.

According to a post on 2CarPros, the issue could be due to a blown batt2 maxi fuse under the hood 1. Here are the steps you can follow to check for power: Locate the batt2 maxi fuse under the hood. Use a test light or circuit tester to check for power. If there is no power, replace the fuse. Interior Lights and Trunk Release Switch Are Not Working (2carpros.com) If this doesn't solve the issue, it's best to take your car to a certified mechanic for further inspection.

If the light on your Swan Teasmade is not turning on and the kettle isn't boiling, there could be several reasons for this issue. Here are some troubleshooting steps you can try to identify and potentially fix the problem:

1. Check the Power Source:
   • Ensure that the Teasmade is properly plugged into a working power outlet. Try using a different outlet to rule out power supply issues.
2. Inspect the Power Cord:
   • Examine the power cord for any visible damage or fraying. If you find any issues, it's important to replace the cord with a new one.
3. Check the Fuse:
   • Teasmades usually have a fuse inside. Check if the fuse has blown. If it has, replace it with a fuse of the same rating.
4. Water Level Sensor:
   • There might be an issue with the water level sensor. If the Teasmade doesn't detect water, it might not turn on. Clean the sensor area and ensure there are no blockages.
5. Heating Element:
   • The heating element might be faulty. If the Teasmade is under warranty, contact the manufacturer for repairs or replacement. If not, you might need to take it to a professional repair service.
6. Thermostat Issues:
   • The thermostat that controls the boiling temperature might be malfunctioning. This would require professional repair or replacement.
7. Manufacturer Support:
   • If your Teasmade is still under warranty, it's best to contact the manufacturer's customer support for guidance and possible repairs. They might have specific troubleshooting steps tailored to your device.

A clue to the machine in use may help you get an answer. Failing that, have a look in your user manual.

consider reaching out to nuo's customer support they may sent you a softcopy or any nearby reseller.

If the roller width of your pasta maker seems to be locked at a specific setting, like #6, and you're unable to adjust it, here are some steps you can try to troubleshoot and potentially fix the issue:

1. Inspect for Obstructions: Check for any debris, pasta dough residue, or foreign objects that might be blocking the mechanism responsible for adjusting the roller width. Clean the machine thoroughly and remove any obstacles that could be causing the locking.
2. Lubrication: Sometimes, the adjustment mechanism can become stiff due to lack of lubrication. Apply a small amount of food-grade lubricant or vegetable oil to the moving parts and joints, and work the adjustment knob back and forth to help loosen it up.
3. Gently Apply Pressure: While the machine is off and unplugged, try gently applying pressure to the adjustment knob while attempting to turn it. This might help release any stuck parts or overcome resistance.
4. Wiggle and Jiggle: Gently wiggle and jiggle the adjustment knob while attempting to turn it. Sometimes, this slight movement can dislodge any stuck components and allow for proper adjustment.
5. Use a Tool: If the knob is particularly stubborn, you can use a pair of pliers or a wrench (wrapped in a cloth to prevent scratching) to help turn the knob while applying gentle pressure. Be cautious not to apply too much force to avoid damaging the machine.
6. Consult the Manual: If you still have the manual that came with the pasta maker, refer to it for troubleshooting tips specific to your model. There might be manufacturer-recommended solutions for this issue.
7. Contact Customer Support: If none of the above steps work, it might be best to contact the manufacturer's customer support or service center for assistance. They can provide you with more detailed guidance or arrange for repairs if necessary.

Remember, always exercise caution when working with kitchen appliances, and avoid using excessive force that could potentially damage the machine further. If you're not comfortable attempting these steps yourself, it's better to seek professional assistance to avoid causing further damage to your pasta maker.

This is simple maths. Divide 5.50 by 100. Multiply the answer by 20. Add that answer to 5.50. 5.50 / 100 = 0.055 0.055 x 20 = 1.10 5.50 + 1.10 = 6.60

make sure that the basket is in place and you have not overfilled the basket with food.kk