I need the Manual for the Tecnik TKC 1285 Dual Fuel Kitchen
You can find the manual for the Tecnik TKC 1285 Dual Fuel Kitchen online. You can search for the specific make and model of your kitchen to find the manual. Alternatively, you can contact the manufacturer of your kitchen to request a manual.
1/25/2023 7:48:02 PM •
Tecnik Ovens
•
143 views • 0 helpful votes
Program selector will not move
If the program selector on your Tecnik 2677 appliance will not move, it could be due to several reasons. Here are some possible causes and solutions:
- Obstruction: Check if there are any obstructions, such as food or debris, that may be blocking the program selector. If so, remove the obstruction and try moving the selector again.
- Loose or damaged parts: Check if any of the parts of the program selector or control knob are loose or damaged. Tighten or replace them as necessary.
- Mechanical issue: If the above solutions do not work, there may be a mechanical issue with the program selector mechanism. In this case, it is recommended to contact a qualified appliance repair technician to diagnose and fix the problem.
10/23/2022 3:22:41 PM •
Tecnik Ovens
•
49 views • 0 helpful votes
The lights and the fan in our Tecnik electric
Hello Jack728,
I never have found a fuse IN a cooker hood as long as I repair them.
My first impression would be a faulty connection to the grid, as both functions of the hood do not work.
I hope this helps, Kind regards, Dik
Water has stopped going through my Dishwasher!
salt tray does have water in there its supposed to have. its probably the magnetic switch on the mains water line in the dishwasher these can go, it can also be a clogged inline filter this will stop water getting through and is located in between the water line and the unit, removing the the pipe from the back will let you see this. it can also be the main switch on the motherboard as these can go as well and will need replacing but i would check the filter first.
Dishwasher retaining water
Is your drain hose routed correctly? It should loop up higher and then go down to the drain connection under sink
Tecnik Range dual fuel TKC
No you can replace timer or bypass it to make it work. I can source parts for you I and fit if required. David 'The Famous Forry'
10/20/2017 1:30:04 AM •
Tecnik Ovens
•
320 views • 0 helpful votes
It starts but then seems
The reason for the whurring sound is that the water pump is trying to empty the drum first before letting in the new water cycle, I would check your outlet water pipe for any obstruction first by blowing down the pipe to check to see if there's a blockage, with the machine off of course this is of course only a suggestion but I hope it helps eric
Not finding what you are looking for?