Teac Computers & Internet - Answered Questions & Fixed Issues

Sir my ufone sim was blocked plz tell me how i can open puk code - posted in

This will all depend on the age of the equipment and what connectors are on each one. Could you post photos of the panels on them showing what connector ports are actually there. How old is the reel to reel? The really early 1970's models will probably not work or will need specialist cable adapters to get it to connect to the Kenwood and even then it may not work. The 80's and some of the 90's ones used Component, Phono or Jack Plug connectors. The really modern ones use Optical cables. In general it usually sets up by connecting to the "OUT" port on the reel to reel and the matching "IN" port on the Kenwood.

how can i unlock mtn Sim if its block

The 9 pin cable is available on eBay. Try Teac direct. https://www.google.com/search?q=Teac+Micro-Hi-Fi+CD-X8+subwoofer-to-console+replacement+cable ..

Just turn your phone when asked to enter PUK enter it and your ready.

There are several things that you can try. Move the carriage for the laser diode to the center area, Put a disk in and note where the label is and then eject it to see if it is spinning, check the voltage on the laser diode. This will give you an idea of what the issue is.

Some free software for burning.
How to burn a Music CD.
How to burn data files to a disc (for other computers to read)

This issue may occur if the third-party DVD decoder program that is installed on your computer is not compatible with Windows XP.

Hi Albert, for what you say, COM ERROR, corresponds to an internal communication problem, try disconnecting the TEAC, from the power outlet, wait a couple of minutes and reconnect it, the problem should be solved This is indicated on page 26 of the User Manual If not, you would have a more complicated problem and I suggest you consult a specialized technical service I hope you can solve the problem Greetings Franco Dosil Hola Albert, por lo que comentas, COM ERROR, corresponde a un problema de comunicacion interior, prueba desconectar el TEAC, del toma corriente, esperar un par de minutos y volver a conectarlo, deberia resolverse el problema Asi esta indicado en la pagina 26 del Manual de Usuario Si no es asi, ya tendrias un problema mas complicado y te sugiero consultar a un servicio tecnico especializado Espero puedas resolver el problema Saludos Franco Dosil https://www.teac-audio.eu/downloads/2/2/8/1/6/CD-RW890_EFS_.pdf

What operating system are you using? NOTE: A usb floppy drive will not work when plugged into a USB 3.0 socket, you need to plug it into USB 2.0 if you have one.

u can get your puk code from your service provider
PUK code is called as PERSONNAL UNBLOCKING KEY.
Your phone will ask for PUK code when you entered the PIN code wrongly several times depending upon the mobile make. The mobile asks for PUK code so that unauthorized persons do not use your mobile for wrong cause.
To get PUK code please contact your service provider through phone or go directly to their office. They will provide you the PUK code for your mobile. The PUK code for mobile phone.so that you can open your phone. When you planning to call your service provider you cannot use your mobile as it is fully locked. Please use some other mobile with same network to call your service provider.
While you get the PUK code ,the service provider customer care officer will ask for your personal details to check whether the mobile belongs to you only. If they are satisfied with your answers they will provide with the PUK code
DONOT enter the PUK code several times wrongly,It will block your sim card permanently.
This PUK code is FREE. You no need to pay any sum to get the PUK code
Thank You.

your usb may be in the wrong format

There are two small black phillips screws near where the cable is, take those out. The opposite side from the screws is the cover, it pries off. You can work a flat tip screwdriver in there and see if you can pop it off without damage. Start on the sides. If you're having trouble with that you can remove the rubber piece going around the outside first. I started where the floppy opening is, you can pry it out with a small flat tip screwdriver then just pull it out. Do the same for both sides of floppy opening. Then you'll have to take the phillips screw by the motor to remove the drive from the case. There is another small phillips screw holding the cover, remove that and you can work the cover off. Now you can clean the heads.To put it back together screw the drive cover back on, then screw it back into the case. Put the rubber piece in, then push the top cover back down till it snaps in. Then put the black screws back.

Try different USB cable and different port on your PC. Then look for driver and uninstall - plug back in and reinstall driver. Try above on another PC to help determine cause. If none of these work, I recommend a swap on a working laptop and use a boot CD known as EBCD to attempt recovery.You need another computer to make one of these, but make a EBCD, emergency boot CD. With this made, boot failed computer to the CD by hitting the boot sequence or similar message on initial powerup (BIOS). Then follow instructions once this CD boots up. See link below. I recovered one this way a few weeks ago. EBCD Reset Windows passwords

Try using diskette in another pc drive,if it works copy data to new diskette, its not unusual for diskettes to wear out thro constant usage.

Put the disc in any pc and use minitool partition wizzard. You will loose the data

hi Inthegrade. there is a couple off ways to do this. i think it best you go to this link and have a read up on the best way it could help you out. how to transfer from external hard drive to Windows 8 Esus desktop Google...

Check for updated firmware on Dells support site. There's only one laser to read, write. If it's reading it should write unless the switching eprom is bad or outdated, udated firmware should solve the problem

Looks to me like a hardware problem

The Puk number depends on the pin lock on the sim, the phone will still work with a different Sim card.

To unlock the Puk code you need to call the contact number for the service provider for your Sim. Alternatively you can unlock the PUK code at a local shop for a small fee, £10 or £20 in UK.

To unlock PUK, call the company that branded your Sim card.