TDK Popular Questions, Answers, Tips & Manuals

If your TDK NX-4CD has no volume and the CD door does not open, here are a few steps you can try to troubleshoot and potentially resolve the issue:

1. Check the mute function: Make sure the unit is not set to mute. Look for a dedicated mute button on the unit or on the remote control and ensure it is not activated. If there is no dedicated mute button, check the volume controls and settings to ensure they are not turned all the way down or set to minimum levels.
2. Reset the system: Perform a system reset by disconnecting the power source from the TDK NX-4CD. Unplug the power cord from the electrical outlet and leave it unplugged for at least 10-15 minutes. This will allow the unit to fully power down and reset. After the waiting period, plug the power cord back in and test if the volume issue is resolved.
3. Check the speaker connections: Ensure that the speaker wires are securely connected to the appropriate terminals on the back of the unit. Sometimes loose or disconnected speaker wires can result in no sound. Additionally, check for any visible damage to the speaker wires and repair or replace them if necessary.
4. Clean the CD player mechanism: If the CD door does not open when pressing the Open button, it could be due to a mechanical issue. Gently clean the CD player mechanism using compressed air or a soft cloth to remove any dust or debris that may be obstructing the door's movement. Be careful not to force the door open to avoid causing further damage.
5. Seek professional repair: If the above steps do not resolve the issue, it may indicate a more significant problem with the internal components of the TDK NX-4CD. In such cases, it is advisable to contact a professional audio equipment repair service or contact TDK customer support for further assistance. They will have the expertise and specialized tools to diagnose and repair the specific issues with your unit.

It's important to note that attempting any repairs or disassembling the unit yourself may void any existing warranty and could potentially cause further damage. Therefore, if you are not comfortable with electronics repair, it is best to seek professional assistance.

Hi, Please restart your computer once before attempting to access your external drive again. If this issue continues, please temporarily use another computer to access the drive and run a virus scan on your windows 7 computer. Thank you.

hi find link for tdk formatting link http://tdkperformance.host4kb.com/article/AA-00240/0/Formatting-a-Flash-Drive-on-Windows.html

Hold down the A33 and AUX button together for 5 seconds. The A33 should flash the volume LEDs and then reset and turn off. Let the speakers remain off for 10 seconds before turning it back on. The unit powers on in the AUX mode and you should be able to press Bluetooth and pair the unit with your device.

How can I fix my kolin aircon modelkfm-400f1j with error 5 or ES?

ManualsLib Makes it easy to find manuals online try this site there are many others that off free manuals just search on the model u want. this one is my first port of call

I am very interested in this issue

MMMmm, bummer. The earphone CABLES look rather small and vulnerable? IF you move the CABLE NEAR the connecter do you hear any sound? How about up at the earphones themselves? If you wiggle the cable are there any sounds? There HAS to be a 'open circuit' somewhere? Maybe the volume was set too high and the LEFT earphone happened to blow out? And perhaps it's time to treat yourself to a NEW headset with a MUCH better and substantial connecting cable? Anthony

Google it.

Hello Jox777, Recommend contacting TDK technical support here: Technical Support TDK Product Center

Stick is probably formated in NTFS file format. Windows XP cannot read that, only FAT 16 and FAT 32

Sorry, but you are going to have to describe the problem if you want an intelligent response. What do you mean by 'wheels'?

Download Partition Wizard and install it. Put your 4GB drive in and open Partition Wizard and click on your 4GB drive. On the left side click wipe partition and click format then click apply and wait. Now your drive is completely blank and all 4GB are back. Hope this helps.

https://www.softwaredriverdownload.com/tdk_da-3826_owner_manual_pdf.html

it will be the turntable speed not exact quality turntables have bars all around the circumference and when the speed is correct under a fluro light those bars will appear as stationary or using a strobe light set at 50 or 60 cycles a sec bars going anticlockwise are too fast and moving forward are too slow quality tables have a small knob or screw to adjust motor speed

Please check if it behaves the same on another computer system. Otherwise reformat it again with FAT32 or NTFS format.

The CD-R audio is not an obsolete format. Here's one set of writable discs from Amazon: https://www.amazon.com/Sony-50CRM80RS-Audio-50-Pack-Spindle/dp/B0002ZDIKW/179-2088873-7802310?ie=UTF8&*Version*=1&*entries*=0 . It is not the cheapest CD format, but they are out there. Amazon lists several other brands of CD-R Audio. I hope this helps. Cindy Wells

Try resetting by leaving disconnected completely from the mains for 2mins. Throughout this time frame keep your finger pressed on the power/standby button.

The two metal cylinders are guide rollers where the tape goes in and out of the cassette. If you pick up any VHS tape and press the little button that allows the flap to come up, you should see them.

The disc may be corrupted :( In most cases external floppy drives work just fine but the disc they are reading is old. Shelf life of floppies is really only 3 to 5 years. After that you really can't trust that you'll be able to read them. I've had discs up to 10 years old that I can still read, but others that are only a couple years old I can't. Try plugging the floppy into another PC to see if that one can read it. Recommend trying it on a newer PC (Windows 7 or 8)