Taylor Measuring Tools & Sensors - Page 2 - Recent Questions, Troubleshooting & Support

remove four screws on back of unit,cut red wire going to round beeping speaker inside lower front faceplate. problem solved it will never beep again but still read temp correctly.

Base Station Battery Installation ·Remove the printed vinyl label from the LCD screen of the base station ·Position the remote sensor near the base station ·Open the battery compartment at the back of the base station and insert (2) AA batteries according to the polarity markings. Replace the battery compartment cover. ·Within a short time the RF signal icon (located to the left of the outdoor temperature channel indicator) will start flashing. This indicates that the base station is ready to pick up the RF outdoor temperature signal from the remote sensor. It will continue to flash for 3 minutes or until the signal from the remote sensor is detected. Register the Remote Sensor ·Open the battery compartment at the back of the remote sensor and slide the channel selector switch to your desired channel. For the first remote you may select any channel, for additional remotes select any unused channel ·Insert (2) AAA batteries according to the polarity markings. Be sure to install the batteries in the remote within the time that the RF signal icon is flashing on the base station. 1541 WeatherGuide Wireless Weather Forecaster with Barometer

Alkaline batteries will not work below freezing in the outside temperature sensor. Buy Lithium batteries for the outside sensor unit alkaline are okay for the inside unit.

yes there is a solution to stop the beep. Take a piece of cotton and put into ur ears..... simple

My scale is doing the same thing and I can't find anything on how to fix it what a waste of money did you ever get this resolved?

Hit reset next to batteries to have it sync with outside temp sensor. Push mode button to scroll thru date, time. Use up and down button on back to adjust numbers.

put probe into boiling water - it must be close to 212°F - if not u need a Taylor expert - and more info - the easiest thing to try is another probe, or plug ur probe into another base.

https://docs.google.com/file/d/0B27YbzWEG0xSRDJoVUFVdTVTelk/edit?usp=docslist_api

Return it to the manufacturer for warranty repair/replacement

http://www.scalemanuals.com/taylormanuals/5758-manual.pdf Try this link to download it. Medical Articles

www.taylorusa.com