Taylor Hardware & Accessories - Page 6 - Recent Questions, Troubleshooting & Support

Suena como si pudiera haber un problema con el transmisor de su radio Cobra 200 GTL N9. Es posible que la fuente de alimentaci?n de la radio no est? proporcionando suficiente energ?a al transmisor, o que el transmisor no est? conectado correctamente. Debe verificar la fuente de alimentaci?n para asegurarse de que est? conectada y proporcione el voltaje y la amperaje correctos a la radio. Tambi?n debe verificar todas las conexiones entre el transmisor y la radio, incluidos el cable de antena y el cable del micr?fono. Si las conexiones est?n seguras y la fuente de alimentaci?n funciona correctamente, entonces el problema puede estar con la radio misma y es posible que necesite ser atendida por un profesional.

It sounds like there may be an issue with the timer itself. Some things you can try include double-checking that the timer is set up correctly and ensuring that the power supply to the timer is stable. You can also try cleaning the contacts on the timer, as dirt or corrosion on the contacts can prevent the timer from functioning properly. If these steps do not help, it is possible that the timer is malfunctioning and may need to be replaced. If you have tried these steps and the timer is still not working as expected, you may want to consider contacting the manufacturer or a professional for further assistance.

Just reprogramme it

Hi, It seems like your device is being sold on websites like amazon and ebay. Your best move might be to request the instructions from one of those sellers and ask them to send it to you as an individual product. Otherwise, you might have to reach out the librarian at a local college or technical college to ask if they could provide you the instructions that you're seeking. Thank you.

OK, even though the thread is old, I had to add my answer, to clarify things. Settings: F = Switch is Off O = Switch is constantly On (no timer mode) d = Switch turns On at Dusk, and turns Off at Dawn 1-9 = Switch turns On at Dusk, and turns Off after the number of hours shown in the display 1.-9. = Switch turns On immediately, and turns Off after the number of hours shown in the display

This timer is made by Living Solutions. It's best to set the timer prior to plugging it in. To set current time: Lift protective cover and set the current time by rotating dial CLOCKWISE until the arrow on the side of dial aligns with the correct time. Note: Timer dial will rotate COUNTER-CLOCKWISE when operating. To set timer: Move timer arms (located around the dial) towards the middle of the dial for the time you would like the timer OFF. Move the arms towards the outside of the dial for the time you would like the timer ON. Release protective cover.

Please check the link for the Manual https://images.homedepot-static.com/catalog/pdfimages/06/060c891b-9c12-4311-ad3f-41f6cec89d87.pdf

https://www.google.com/search?q=368-1740+power+stake+manual

The lift up tabs are OFF when up and ON when down. Best to you!

copy and paste https://www.fixya.com/support/t26373873-instruction_manual_052_8815_0_wish_set ..

It is faulty and under warranty so return it or contact support and Hamilton Beach.

Question edited to add maker. Question moved to Timers. KD86 Instructions: Set slider to SET TIME and set the time using the HR & MIN buttons. Set slider to SET PROG, Use the HR & MIN buttons to set the turn on time and press SET. Press EVE and set the turn off time, then press SET. You can use the EVE button to set further ON and OFF times. When you have set the times you want, set slider to AUTO. https://www.google.com/search?q=kambrook+timer+kd86+manual ..

you will need neutral and ground

Hi, Please call Home Depot and Lowes to see if they have the classic wiring diagram and can send that to you. Otherwise, you can call the manufacturer directly and ask that the document be emailed to you so you can program the wall switch. Thank you.

Copy following link for setting analog timers by experimenting with features.http://waterheatertimer.org/How-to-set-timers.htmlhttp://waterheatertimer.org/Woods-timers-and-manuals.html#BrinksAdd a comment and describe product in detail If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Question edited for clarity. Here is the manual https://media-www.canadiantire.ca/manuals/product/0528819/0528819-enfr-7502a212-996f-42fb-91aa-8067e606ba26.pdf https://www.google.com/search?q=noma+timer+052-8819-2 ..

Hi, Please press the start/stop button to reset the oven and then attempt to set and run your timer again for a length of more than 2 minutes. If the issue occurs again, please reference the troubleshooting section of your product manual in order to overcome this. Thank you.

Hi, Please first check that you don't have any stuck or jammed buttons on your dryer. if possible, please attempt to factory reset your dryer. You can learn how to do this by viewing your device's manual. If you don't have the manual, please reach out to Electrolux to email it to you by calling 1 (877) 435-3287. Thank you.

'make model (what it is)' in all questions please! Impossible to guess what you have that has a 'white wire' and a 'display'.

The Geyser Load Control Timer, ISG1201, is designed to prevent geyser from operating during the Eskom's designated weekly morning and evening peak times. The ISG1201 features 4 easily selectable, pre-programmed, geysers "ON" operating profiles to ensure maximum comfort whilst not burdening the user with the complicated process of having to program the unit. The profiles are as follows;

• Program (1) is always "ON"
• Program (2) "ON" after sunset to accommodate solar geysers
• Program (3) "OFF" all the time
• Program (4) savings program - "ON" 6 hours weekdays and 12 hours weekend days

Source: http://www.kgwanyape.com/solutions/isg1201-geyser-load-control-timer/