Tatung Popular Questions, Answers, Tips & Manuals

Televisions that lack high definition will neither need nor have HDMI capability. Older televisions will not require the 1080p connection that HDMI provides. If yourtelevision is not a flat screen, LCD or plasma, then it will not have HDMI capability.

Look for color temperature settings under the menu and video settings. If there is an overall factory reset or restore to factory settings, try that as a last resort.

I feel like I need more details here like what kind of tv you have (model number too) but you might wake it up by pressing enter on the remote.

The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size. Search the site by type in the "brand name" to your device; [Exclude the model number], in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

www.publiphone tatung.com/ Try this link.

If you wish to get some details; visit the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Line, faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent.

Unlock it from what? Parental controls? Read the manual

If you can't google it is had to be paid for. Or sometimes you have it in your manual.

Tatung uses Sanyo kit in their TVs. Follow the instructions to Sanyo, after confirming about the IC numbers used in your TV. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box and press "Enter". http://electronicshelponline.blogspot.com/

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Line faults & possible causes to LCD screen are given with illustrations.

If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

rca to rac or hdmi to hdmi cables then select av on the tv to which ever one you connect it to eg avi av2 av3 or hdmi 1 hdmi 2 etc

Check the cables and connections

try this go to control panel click on sound your device should be listed click on it and make it your default device

SWTCH IS DIFFECTIVE AND ONLY EXPERIANCED TECHNITIANS CAN REPLACE IT.REPLACING THE SWICH WILL SOLVE YUR PROBLEM.IF NOT CHECK THERMAL SWITCH.

hi what sort of satellite box are you using if you have no hdmi use scart lead to av 1 or ext1 hope it helps regards shaun

Check and replace the back-light inverter board. google.com/+GopakumarGopalan

If you have 3 capacitors bad, there are likely more that you missed.You didn't mention what kind of Flat Panel. If LCD, then check for the 5 volt supply. The caps are likely 220uF and 1000uF - 1500uF and all in the 16 volt range.

http://www.tatungusa.com/eng/software_utility.aspxfind this go to downloads.

i need a remote for my edtv ilo P42bskh-Us2 can anyone help me??