Tag Heuer Watches - Page 4 - Recent Questions, Troubleshooting & Support

take it to a watchmaker

push the crown in if it is in the adjust position .then shake the watch around the auto mechanism sould start the watch

I can solve your problem as I had the same one on my Tag Heuer 2000 Classic Multigraph WK111A.BA0331, just recieved last week. A few minutes ago I was finally able to get the company to send me a PDF file with the instructions, and you definitely need them. Email me your address and I will send you this file with my comliments.

Really need more info on what model watch you have but in most cases pull the cown all the way out to adjust time

Try this.

Pull the winder out fully. Then press the top right chronograph button to move the centre seconds hand on. Then push the winder back in.

on some models you should only pull the winder half way out.

good luck

see link below. If the instructions available from the link below are of no use consult the supplier, they should be happy to provide support for an expensive item such as this. http://www.tagheuer-timing.com/en/download-tag-heuer-professional-user-manuals

look for a tag store near by. if u cant find one most jewelry stores with a shop (not in a mall) can either do it there or send it out. sometime the band can be fixed

How To Set Tag Aquaracer Watch

The servicing was not carried out properly. Take it back.

Just the basic manual right? I have a website.

You have to unscrew the crown once it is unscrewed can you pull it out once for the day and twice for your time. Be sure to screw the crown back in when you're finished or else you'll get moisture inside.

Hold right bottom button and then press right top button, while looking at tge watch face, this will toggle a little AL display indicator over the minutes digit

There are several good online sources: Tag Heuer Watch Crowns Pushers and Tubes Thread TAG HEUER PARTS ONLINE and TIP on HOW to SAVE MONEY ON REPAIRS http://www.chrono24.com/en/tagheuer/partsaccessories--acc.htm

TAG Heuer WatchPart co uk Watch Parts Tag Heuer Omega Tools Links Try this link to get assistance. Gopakumar Gopalan Google

Pull out the crown to the alarm setting position. The crown is located on the right side of the face of the watch. Pull the crown out until "AL", the alarm indicator, is shown on the watch. Depending upon the model of your Tag Heuer Aquaracer watch, you will either pull the crown out in the first or second position.

Select the hours and minuets for the alarm. Once your watch is in the alarm setting position, press the bottom right button on your watch. This will enable you to select the hours and minuets that you want to set the alarm for.

Set your alarm. To begin setting your alarm turn the crown clockwise until the desired hour or minutes are displayed on your Tag Heuer Aquaracer watch. If you happen to accidentally pass the alarm time, turn the crown counter-clockwise the get back to the desired alarm time.

Save your alarm. When you are ready to save your alarm, simply push in the crown. Once your alarm sounds, to silence it press any button on your Tag Heuer Aquaracer watch.