Tag Heuer Link - Recent Questions, Troubleshooting & Support - Page 4

Hi
This is a warranty issue, the watch should not lose time like this. Take it back to the supplier ASAP
Cheers
Dave

Use a winder if you must but I recommend just winding and setting when you want to wear them as most winders I have seen are very cheap and unreliable. Expect up to 50 hours from most watches usually not less than 30, this is if the have recent< 5 years, overhaul.

Check the instruction manual if you have one. Tag-Heuer watches move in 5 second intervals to let you know the battery needs replacing. A neat feature. Now you know that you have a real Tag!

Unscrew the crown and pull out halfway. Use the stopwatch buttons to advance the hand to where you want it. Then push the crown back in and screw it down. You may need to pull the crown out all the way--I cannot recall which setting controls the minute hand and which the hour hand on the stopwatch function. This has to be done every time the battery is changed.

I'm not sure this will help, but try to reset the watch completely. Use users manual how to do that.
Sometimes it does the job.

If that buttun is pushbutton, then the fixing stopwasher has come off (inside watch).
If you meen the crown (winding and setting button), then setting lever or setting lever spring is damaged or broke.
Find your nearest watchmaker as both need professional repair and parts.

Hi,

Please make sure that you have replaced your battery properly.I suggest you t reinstall it once again.

Let me know the result

I have a couple of questions. Do you wear the watch all day? How is your activity level ? If the answers to these is yes and good, then the problem lies in the self winding mechanism.
Without seeing the watch it is imposable to give you a complete estimate of the work needed.
We offer free estimates and all our work is guaranteed.
Donald McPherson Certified Watchmaker AWCI
www.finewatchmaking.com

The Battery might be dead. and if its a problem with the actual watch home repair might not be the best since its a nice watch. i would just take it to a watch repair shop and ask them. hope it was some help

Have a look at bracelet clasp exetnder from RTL Watches

This is to let you know that the battery needs to be replaced.make sure that you use a watchmaker that can test and replace any worn case parts so that your watch will retain it's original design water resistance.

Donald McPherson

Certified Watchmaker AWCI

www.finewatchmaking.com

send in for repair to a watchsmith

instructions is:
http://www.tagheuer.com/_documents/manuals/EI2254_en.pdf

Very good video of this on youtube. http://www.youtube.com/watch?v=EQJUl64EMIE. Good luck, as the guy on the video says it is complicated!

we wouldnt know

I just managed to solve this problem. Turn the digital face to the first screen which is probably flashing EOL with date. Then pull knob out as if you were going to set the time. Hold in two auxilliary buttons, you should see BAT come up on the screen. That should be it stopped flashing!

You have selected a wonderful watch... Heuer and TAG/Heuer should be gently wound by the motion of the human wrist and the falling of a centrally pivoting weight (there is no ideal direction). AUTO-WIND function is NOT at all unique to your watch... After a couple of CHEAPER "winders" failed me... and after I figured about 4 watches was more than enough to keep wound... I found the greatest BASIC watch winder... to run year over year (efficiently and quietly) MTE watch winder (their very basic WTS-4). Good luck: I WILL try to include the URL (see page 6) http://mte-watchwinder.com/fileadmin/PDF-Uhrenbeweger/MTE_Watch_Winder_Brochure_Engl.__09-2015.pdf