Symphonic Televison & Video - Page 2 - Recent Questions, Troubleshooting & Support

0helpful
1answer

My symphonic tv shuts off

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. https://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary. Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.
2/20/2018 4:08:43 AM • Symphonic... • Answered on Feb 20, 2018
0helpful
1answer

FIRMWARE UPGRADE

FYI, I did the 8x upgrade and the unit became flakier. So one time it handled 8x discs and the next no. So it went from very stable to hit or miss. Redid the update and the same problem.

2x RW discs work ok in it and can be read, edited, and formatted in my newer recorder that handles 16x discs.
1/15/2018 6:08:08 AM • Symphonic SR90VE • Answered on Jan 15, 2018
0answers
0answers
0helpful
1answer

Symphonic TV codes

hi Noel this is all i could find. Symphonic 10180, 10171. if none work go to this link might help you out. 5 Digit Universal Remote Codes For TV Codes For Universal Remotes
11/20/2017 9:28:41 PM • Symphonic... • Answered on Nov 20, 2017
0helpful
1answer

Symphonic TVR13DC buttons

Your set is going out with style. Time to go shopping.
9/7/2017 12:52:48 AM • Symphonic... • Answered on Sep 07, 2017
0helpful
1answer

How do i hook up my new cable box for descrambling to my vcr

If the cable box has audio and video outputs on it then use RCA type cables to connect the outputs of the cable box into the video and audio IN of the back of the VCR. Then select L1 on the VCR. If your TV has video and audio input connectors connect another set of cables form the VCR OUT to the IN puts of the TV, then select the AV inputs on the TV. If your TV doesn't have video and audio inputs, then use a coax cable from the RF/Antenna OUT of the VCR and connect it to the antenna jack on the TV. Now select 3or4 on the VCR to whatever works for your location and tune the TV to that same channel. That's it ...you now can watch and record the channel you're watching. You will have to have the VCR powered up all the time to watch TV
7/28/2017 11:17:14 PM • Symphonic SL260A... • Answered on Jul 28, 2017
0answers
0helpful
1answer

I have symphonic tv I can't get my time warner remote to change channels just turn it on and off what do I do

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://homenol.blogspot.com/ http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device. Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.
5/13/2017 2:00:38 AM • Symphonic... • Answered on May 13, 2017
0helpful
1answer

How do you go about programming the codes to set up a universal remote to a symphonic model WF2004 tv

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://homenol.blogspot.com/ http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device. Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts. 0611 0044 0166 0539 0231 0536 0633 Check these codes first.
5/8/2017 11:41:26 AM • Symphonic... • Answered on May 08, 2017
Not finding what you are looking for?
Symphonic Logo

973 questions posted

Ask a Question

Usually answered in minutes!

Top Symphonic Televison & Video Experts

Cindy Wells

Level 3 Expert

6688 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Symphonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...