The wARNING LIGHT IS CONSTANTLY ON , ON MY SWAN SR4150W CHEST FREEZER...AND IT IS VERY HOT ON THE OUTSIDE, ANY IDEAS
the outside is the condenser exchanging heat to the air and indicates that the system is working
you only have a problem if the inside is not freezing.
constantly running can be that the setting is too low numbers i -20 with 20 the coldest and the colder the setting the more loss through the insulation so the motor keeps running
the door or lid open or too frequently being opened
the inside iced up and needs defrosting
The light could simply be a power on light
7/7/2018 10:50:05 PM •
Swan Freezers
•
1,346 views • 0 helpful votes
Hello my swan retro top fridge freezer fridge door seal is not catching to close
Remove the defective gasket from the refrigerator. The removal method may differ depending on the properties or materials that hold the gasket in place on your refrigerator.
- Examine the gasket on your refrigerator to determine how it is held in place. The gasket may have adhesive strips, screws, or clips that fasten it to the refrigerator door panel.
- Use the appropriate tools or methods to remove the defective gasket. For example, if the gasket is held in place by screws, use a screwdriver to remove the screws. If adhesive strips are in place, use a putty knife to pry the gasket away from the refrigerator door panel.
- Pull the gasket away from the door panel one side at a time. This will allow you to verify that all fastening components have been completely removed, preventing pieces of the gasket from breaking off and being left on the door panel otherwise.
6/10/2016 4:38:24 PM •
Swan...
•
267 views • 0 helpful votes
Not finding what you are looking for?