Spy Vehicle Parts & Accessories - Page 2 - Recent Questions, Troubleshooting & Support

Disable the alarm no make sure u always lock the doors

Spy Vehicle... | Answered on Sep 14, 2013

In your local shop - a single AAA is all the Spy 5000m remote fob needs.

Brand Remote... | Answered on Apr 24, 2013

Installations of this nature are usually reserved for professionals. However, get out your installation manual. You will also need two single pulse double throw relays and some diodes. First you will need to locate the ground when running.This wire might be labeled " (-) third ignition". The first relay for the starter will be wired like so: starter wire to 86, fused 12 volts to 87, 30 out to vehicle second starter wire, 85 to ground when running. The second relay will be wired 86 to vehicle ignition, 87 to fused 12 volt, 30 out to second ignition, and 85 to ground when running.

Brand Remote... | Answered on Jan 27, 2013

You need to be more specific if you expect assistance with your problem.

Brand Remote... | Answered on Jan 27, 2013

what brand is alarm? hood pin IS required,ground hood pin lead try to remote start

If you need further help, I’m available over the phone at https://www.6ya.com/expert/stephen_fa62cb6d50fe05e8

Brand Remote... | Answered on Jan 19, 2013

You need to adjust the tachometer sensing wire, it usually wraps around a spark plug wire so I can sense when the car starts. On my spy alarm, the wire was grey. Hope this helps.

Brand Remote... | Answered on Oct 15, 2012

Not finding what you are looking for?
Spy Logo

62 questions posted

Ask a Question

Usually answered in minutes!

Top Spy Vehicle Parts & Accessories Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Norman Al-Anbar

Level 3 Expert

630 Answers


Level 3 Expert

5436 Answers

Are you a Spy Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides