Springfield Measuring Tools & Sensors - Answered Questions & Fixed Issues

Question edited for full 'make model (what it is)'. Question moved from Computers. Probably the same as this one https://www.manualslib.com/manual/628162/Springfield-Precisetemp-91905.html?page=4#manual https://www.google.com/search?q=Springfield+88099+manual ..

Steve, thanks for that info on the reset button , I go through this every time I change batteries. I put a note on the back of my Springfield temp now.

Contact vendor online to see if they can assist you in obtaining a manual. https://www.homedepot.ca/product/springfield-wireless-weather-station-color-lcd/1000816999

Is there a question here? Google is your friend. Use it.

https://www.manualslib.com/manual/1074891/Springfield-91049-1.html Springfield 91049 1 Instruction Manual

Battery ok? First to check. Clean the terminaks

Springfield PreciseTemp 91756 User Manual

Two possibilities, one with boiling hot water the other with some ice cubes in a cup. immerse the thermometer in a jar of boiling water and adjust the themeometer to read 100C or 212F hold it down witha piece of adehasive tape firmly and glue it. Or imerse it a jar of ice with water so that the ice begins to melt and adjust the themometer murcury line to line up with 0C or 32F firmly with tape and glue it in place. You are done

I have the same problem. Any ideas? My guess is that the outside temp sensor is defective.

Hi, Jackie. Is it look like this ? With Windspeed and 3 station temperature reading ? If so, model number is 91751 Good luck with finding Manual. I have paper manual with me, I can scan most useful pages for you (Buttons)

Try to log on to Springfield to see if they have a manual on line . You may have to call them directly .

I can understand when it is very cold outside, the voltage of the battery drops below the point is can service the transmitter (in the thermometer). But if night temperature is not below zero that can't be the cause. Be aware, even batteries that come with a new device, can be "old". you never know what the battery had to last, before you put it in the device. I would advice to buy a new battery for the thermometer. Look in the manual, for what the manufacturer advices. But never use manganese (Zinc-Carbon) batteries. Although the alkaline batteries perform bad in cold, it could be the best choice.

The same as when you have two radio stations on the same channel or frequency. The receiver wants so receive them both, resulting in a scrambled and useless signal in the receiver. It won't work. If the system can work with more than one (wireless) thermometer each will have an own channel number. and you will have to switch on the display to read one or the other.

I also reset my 91455 today. Go online to Springfield precise temp manual 91455

go to springfield.com and download from there

After 3 months and 4 emails to Springfield they finally responded and told me to buy my probe on Amazon. I can't find one on Amazon, do you have any suggestions or know of where I can purchase one?

SOMETIMES WHEN METAL IS IN DIRECT SUNLIGHT IT WILLGIVE FALSE READING. MY OUTDOOR THERMOMETER IS METAL AND IT READS ABOUT 15 DEGREES HOTTER THEN IT IS. BECAUSE IT'S IN DIRECT SUNLIGHT.

how much is it off? What are you comparing it to?

Yes. Took awhile to find it, but here is the link: https://docs.google.com/gview?url=http://www.weatherconnection.com/manuals/91756.pdf&chrome=true

go to www.fitness.manualsonline.com or www.retrevo.com or www.manualsfactory.comGod bless you