Sony Ericsson Radio Communications - Page 7 - Popular Questions, Answers, Tips & Manuals

try resetting the headset
to do this you just press the vol+ and vol - at the same time

I had this problem. I fixed it doing follow: hold volume keys together, so the indicator is flashed red and green (reset to default settings mode). Then press power button to turn the headset off. Then turn it on again and try to find the headset again from my phone. Then select "pair" from phone menu and typed "0000". The led stopped flashing and headset was connected. Before this my phone couldn't see the headset at all. Hope it will help you! (sorry for my English, I'm from Russia =))

See section 26 of the manual.

http://www.sonyericsson.com/cws/download/1/959/47/1192971541/HBH600_602_UG_R2B_Multilingual5.pdf

It differs from company to company. The default code is 9999

http://www.fixya.com/support/r5008953-pin_codes_most_bluetooth_headsets

turn the bluetooth on wait 10 seconds after the bluetooth has turned on. after it has turned on hold the (+) & (-) volume buttons at the same time for about 5 seconds. the light on the outside will then start to flash green and red, and it is ready to pair to your phone.

Deleting files from your memory card is not enough. Usually the files received threw bluetooth will stored to phone memory and then prompted to store somewhere else by the user. So delete/move unwanted files from phone memory to memory card. Delete all the messages stored in your SIM card too.

Go to http://www.sonyericsson.com and fill out customer request form. Here's a transcript of my request and the response; subsequent correspondence resulted in the item being placed on order and promised in 3-5 business days. To: [email protected] From: phil***@***,*** Subject: Accessories Product: Akono? Bluetooth Headset HBH-602 Opinion: Earloop broke--How do I obtain a replacement? On Aug 16, 2007, at 23:22, [email protected] wrote: Dear Phil, Thank you for contacting Sony Ericsson Online Support. We would be more than happy to send you a replacement ear hook for your HBH-602, Please e-mail back with your address to where you would like the ear hook sent to. Please note that we are unable to ship to a P.O. Box. As part of Sony Ericsson's commitment to excellent customer service, we offer a wide variety of mobile products to suit your lifestyle. If you require more information, or have any other questions, please visit our website at http://www.sonyericsson.com or call us at 1-866-766-9374. Best regards, Michelle

If it is for ps3 got to home page then turn the controller off manually then turn it back on and it should work

when a file is sent to the folder named other, it usually means the fone cannot play the desired file.

thank you
RC
Winchester

The problem is the connection points. Take a pecil reaser and rub it back and forth across the coper strip. Do this to both the earpiece and the end of the charger chord. This is what fixed it for me.

blinking red and green means the headset is in pairing mode and ready to be connected to your phone. This means it is either the first time you have paired the headset or you have depressed the volume +/- buttons simultaneously for more than 5 seconds. If your phone cannot find the headset, it may be a compatibility issue. Try pairing the headset with a friends phone, possibly a sony ericsson. Good luck.

Try your local mobile phone shop
if your in Australia this would be Telstra, Leading edge
or any other mobile phone shop.
Also at the markets

I am having this problem as well. A repair guy told me its probably the antenna's connections to the circuit board, but he couldn't fix it. I'm searching for a solution...

Hold down the volume buttons on the side till the button on the front turns red. Then try to pair, your phone should find it right away...put in 0000 and push connect on your phone. I just paired it with my iphone.

if any one got the solution pleae tell me too hahaha

Ensure the battery has a good charge on it, and attempt to turn the item on while plugged in to the charger. If this does not work, I would return it for a replacement.

Try to hold the volume command on - and + both It will recognize the device when searching for bluetooth headset.

Problem with Lenovo A60 gsm voice call antenna any solutions?

You need to hold down the volyme-buttons (-/+) for five seconds til the headset starts blinking red/gren. Then start the bluetooth serach. Voila!