Sony Ericsson Radio Communications - Page 4 - Popular Questions, Answers, Tips & Manuals

You must put your headset in pairing mode first. Starting with it turned off, press and hold the call handling key until the indicator light flashes alternately in red and blue. Then, make your phone's bluetooth application search for new devices. After a while, your headset should appear on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '0000' (four zeros). If the pairing process is successful, the headset should enter the stand-by mode, and there should be some indications on your phone too.
The pairing process between any two bluetooth enabled devices should be done only once. All subsequent connections should be achieved by turning both your headset and your phone's bluetooth radio on and bringing them both into each other's range. At most, a single press on the headset's call handling key should do.
Hope it works for you.
By the way, if your headset's user guide seems to be missing, feel free to download it from this location.
Please, let me know if you need further informations.
Regards, Carlos

Hi,

You can download and print the instruction manual in PDF format by clicking this link.

Please note: Adobe PDF Reader is required to view this manual. Click here to download the latest version of Adobe Reader.

Hope this solves your problem. Thanks for using FixYa.

Yep. Buy it here from a danish webshop: http://www.gooby.dk/ write 8829 in the search area (you can put Google translation to english on, page is on Danish) Best Regards Henrik from Denmark ps. and if you buy a minimum of 2, you can have 50% discount by using THIS code 96f7f8ff - use it in the payment area... :-)

I've just taken my apart. You have to pull the cowling off the end which has the recharger socket

it means that you are using a A2DP headset and a mono device... i do not think there is anything wrong with it

Accessory instructions: VH300 Before you can use your Bluetooth

code hbh-pv720 0000

You can unlock your Sony Ericsson W200a mobile phone using the unlock code. you can get the unlock code from this site www.theunlockarena.com at reasonable cost...

To turn this headset on you simply press and hold the Call Handling Button for 5 seconds. If it turns on it will make a beeping tone and flash green.

If your new phone cannot find you hedset the easiest solution is to hold the button volumen when the bluetooth in your phone is activated. After that phone should to find your headset

This was extremely difficult to find, but I found it just for you! Please make sure you rate my answer 4 thumbs up! Thanks so much for understanding, it would be a huge help to me. Here is the manual / guide:


http://www.sonyericsson.com/cws/download/1/814/212/1277214725/U20i__UG_EN_1238-6569_2.pdf

figure out how to open it then take the battery out then put in the new one duh

For some phones, provided that both its bluetooth radio and a nearby BT headset are turned on, and the headset's MFB (for the IS800, the only button it has) is briefly pressed. The phone then prompts the user to pair with the headset. For others, the headset must be put in pairing mode, and the phone must be made to search for it. If this is your case, press and hold the IS800's button until the right earpiece's led flashes red / green (the white led, next to the mic, will flash too). Then, you must start your phone's bluetooth settings, and make it search for the headset. In both cases, if you are prompted to enter a pairing code, the IS800's is '0000' (four zeros).
Hope you are able to sort your problems out.
Cheers! Carlos

try charging it for 24 hours to reset it.

Hullo Tillgustaf
I understand you need an A2PD compliant bluetooth adaptor. I’ve just installed one on my PC at work, asked Windows to look for updated drivers on the internet and it has installed correctly.
You can get an A2PD adaptor from Amazon for £1.50 here
Best wishes,
Phil

How to restart my hendsfree? pls answer me, i can connect it with no one

try 00000 on both devices.

Good luck

Hi, Before any bluetooth will connect to any phone, the red or red and blue light must flash back and forth. Make sure you're phone is in the set-up mode to recognize the phone. The easy way to do this if you dono't have directions, is to get the name and numbers off of the bluetooth and go online to find it. It will walk you through the steps to connect it to your phone. I have done this with many different models if all else fails. Give it a try and let me know what happens. This will solve you're problem,
Shastalaker7

I also have this problem with my c903

Worked for me with Motorola and Technocel T10. Hold the power button down till the light alternates between blue and red, then release. It is then in pairing mode. Search for the headset from your phone at this point. Should work unless there is something wrong with the T10 or the phone.